# Update Drawing Settings 

After you create a new project, you can change the default drawing template settings. By default, the template uses Decimal units; you need to change them to **ff-ii-ss**.

1. Navigate to the top ribbon bar and click the **Truss Layout** tab.

![](/assets/w_changedrawingsettings1.d1fe0acbf81e77f4c6f03d4025737caafb9ac6e5413424dbb323d082f736bd0c.6c2bdeac.png)

2. In the **Setup Tools** section, click **Drawing Settings** to open the **Drawing Settings** dialog.

![](/assets/w_setup-tools-toolbar.26b990a9dde16cdb32bc9cd01cb66bedc666180c584dd302fd685db086f28288.6c2bdeac.png)

If the **Drawing Settings** option isn't visible, hover over the icons to locate it.

![](/assets/w_drawingsettings-icon-ribbon.cc22aab8768de96e0e50a2b7544eb7afd13519b95fc5467b69516044d93b2aa9.6c2bdeac.png)

**OR**

Type **UNITS** at the Command line to display the dialog.

3. On the **Linear** tab, under **Unit Types**, select **ff-ii-ss** and click **OK** to save your changes..

![](/assets/w_drawingsettings-dialog_825x844.7ab67cca85895dd829f04fe3a05f72e7e8b6b3f9ead510c43123adadc8c2dae8.6c2bdeac.png)