# Add Verticals at Pitch Breaks

**Purpose**

When using vertical webs at pitch breaks, Truss Studio automatically adds additional vertical and diagonal webs.

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon-44x45.png) Watch video

1. Open **Environment > Edit EnvData > Geometry Controls > Vertical webs at pitch breaks**.


![](/images/csdirector-cstruss/resources/images/ts-vertspitchbreakenv.png)

1. Select None, Both, TC, or BC.


When vertical webs are added, Truss Studio will use those vertical webs, in addition to chord slope changes, to determine the panels and distribute the diagonal webs equally.

A sample is shown below.

![](/images/csdirector-cstruss/resources/images/ts-vertatpitchbreaks.jpg)

**Related Topics**

[Geometry Controls Settings](/csdirector-cstruss/help-center/truss-studio-online-help/env-data-settings/geometry-controls-settings)