# Apply Distributed Loads to Horizontal Webs

**Purpose**

Apply distributed loads to

horizontal structural webs

**Prerequisites**

An existing truss

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon-37x38.png) Watch video

1. Select existing horizontal webs on a truss or add horizontal webs.


![](/images/csdirector-cstruss/transparent.gif)To add horizontal webs:

a. Add joints at the location where you want to add the horizontal webs. See [Add Joints](/csdirector-cstruss/help-center/design-view/joints/add-a-joint) for more information.

![](/images/csdirector-cstruss/resources/images/ts-addjoints-566x203.png)

b. Use the Stitch function to stitch the joints together and add a web.

1. Click **Component** to display the **Component Loading** dialog.


![](/images/csdirector-cstruss/resources/images/ts-componentload-distload-287x247.png)

The **Distributed Load** dialog displays.

1. Select the **Web** option.


Complete the other options including **Description**, **Start** and **End** locations, and **Total Load**.

1. Click **Save** and **OK**.


An dialog with sample entries is shown below.

![](/images/csdirector-cstruss/resources/images/ts-distload-horizwebs-417x339.png)

1. Click **OK** to close the **Component Loading** dialog.
2. Click **Run** to analyze the truss.
3. To see the loads applied to the horizontal member, select **Application** > **Applied Loads View** and click the **View Load** button.


![](/images/csdirector-cstruss/resources/images/ts-distributedhorizloads-example-654x284.png)

**Related Topics**