# Create Heel Panel Bottom Chord Steps

**Purpose**

Easily create an offset in a truss profile that occurs in the first panel from the end of the truss. Truss webbing defines a panel.

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon-40x41.png) Watch video - Heel panel bottom chord step

The following procedures begin with a basic truss, as shown below.

![](/images/csdirector-cstruss/resources/images/ts-nearendvault-basictruss-831x284.png)

1. Enter the following command on the BC Profile command line to create a step in the first panel of a bottom chord: **0 3 v600**


A step and a web are added to the truss. A sample truss is shown below.

![](/images/csdirector-cstruss/resources/images/d-nearendvaultexample-834x245.png)

There are several features you can use when creating bottom chord steps.

Create large/small steps

- Edit the profile to create a large step or small step. Examples of both are shown below.


![](/images/csdirector-cstruss/resources/images/ts-nearendvault-largestep-651x422.png)

![](/images/csdirector-cstruss/resources/images/ts-nearendvault-smallstepcloseup-647x441.png)

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) **Note:** If you right-click on the EnvData button, a popup menu displays where you can select Display Nodes and Analogs to see the geometry behind the resulting truss.

Depending on the size of the step, you may need a slider, wedge, or strut.

Use slider, wedge, or strut

Specify the use of a slider, wedge, or strut in the End Conditions dialog. You can also choose No Reinforcement if you do not want to use a strut.

Note that you can define the settings for heel struts in **EnvData > Geometry > Geom_2xW**. See [End Conditions 2xW Settings](/csdirector-cstruss/help-center/truss-studio-online-help/env-data-settings/end-conditions-2xw-settings).

![](/images/csdirector-cstruss/resources/images/ts-leftenddescdialog-xtramemb-465x507.png)

![](/images/csdirector-cstruss/transparent.gif)Examples

**Strut**

![](/images/csdirector-cstruss/resources/images/ts-strutexample-larry-714x399.png)

**Slider**

![](/images/csdirector-cstruss/resources/images/ts-slider-ex-724x497.png)

Top Chord Slider

![](/images/csdirector-cstruss/resources/images/ts-tcslider-nearendvault.png)

**Create Perpendicular Drop**

Use the **dp** (drop perpendicular or drop for purlins) command to drop the top chord by 1.5" for outlookers. You can use this option once for symmetrical trusses and more than once to create non-symmetrical trusses.

![](/images/csdirector-cstruss/transparent.gif)See examples

Symmetrical truss

![](/images/csdirector-cstruss/resources/images/ts-dpcommandex-2-799x454.jpg)

Non-symmetrical truss

![](/images/csdirector-cstruss/resources/images/ts-dp-nonsymmetrical-795x315.png)

**Related Topics**

[End Conditions/Descriptions](/csdirector-cstruss/help-center/design-view/end-description)