# Create Raised Heel Rafters

**Purpose**

Use top chord profile commands to design rafters and stacked rafters with an end vertical, to accommodate raised heel conditions.

**Steps**

Use the examples below to create different types of raised heel rafters.

- To create a single rafter with a raised heel, enter **c6 ha 10600 6 raf** on the TC Profile line.


![](/images/csdirector-cstruss/resources/images/ts-singlerafter-highheel-1077x610.jpg)

- To create a stacked rafter with a raised heel, enter **c6 ha 10600 6 raf6** on the TC Profile line.


![](/images/csdirector-cstruss/resources/images/ts-stackedrafter-highheel-1080x611.jpg)

- To create a high heel single rafter with a strut, do the following:


1. Enter **c6 ha 10600 6 raf** on the TC Profile line to create a single rafter with a high heel.
2. Use the [Add Board](/csdirector-cstruss/help-center/design-view/add-board) command to add a strut.


A high heel single rafter with a strut is created.

![](/images/csdirector-cstruss/resources/images/ts-singlerafter-strut-1079x611.jpg)

- To create a rafter with a wedge, enter **c6 ha 608 4 raf** on the TC Profile line.


![](/images/csdirector-cstruss/resources/images/ts-rafter-underwedge-1086x612.jpg)

**Related Topics**

[End Conditions 2xW](/csdirector-cstruss/help-center/truss-studio-online-help/env-data-settings/end-conditions-2xw-settings)