# Create Ledger Pocket

**Purpose**

A ledger board is a horizontal framing member attached to a wall or girder truss used to provide bearing for framing components. The ends of truss chords can be held back so a truss can bear on a ledger board.

**Steps**

1. Click **Left/Right End Desc**.


The **End Description** dialog displays.

![](/images/csdirector-cstruss/resources/images/ts-ledgerpocketsetting-414x366.png)

1. Click to select a **Ledger Pocket** option.
2. Specify the width of the pocket by selecting an option from the drop down list.
3. Click the appropriate button to apply the end condition to the specific end (left, right, or both).


![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) **Notes**

- The pocket height matches the bottom chord size; the bearing is represented as a "beam" matching the specified size of the pocket, and is moved up into the pocket. Plating placement will be adjusted to accommodate this bearing condition.
- When a ledger exceeds depth of carried truss bottom chord, it is recommended that Brg Block be used in lieu of BC Ledger.
- You can apply both a bottom chord ledger pocket and parapet extension in End Description for the same truss end.


![](/images/csdirector-cstruss/resources/images/ts-ledgerpocket-parapet-endconds.png)

![](/images/csdirector-cstruss/transparent.gif)See examples

![](/images/csdirector-cstruss/resources/images/ts-ledgerboardexample1-759x222.png)

**Related Topics**

[End Conditions/Descriptions](/csdirector-cstruss/help-center/design-view/end-description)