# Create Overhang for Exposed Porch Area

**Purpose**

Apply wind load to the bottom chord of a truss at an exposed porch area (sometimes called a lanai).

**Steps**

1. Open the selected truss.
2. Open the **Bearings** dialog.
3. Select the **Overhang Support** option (for the left bearing only).


![](/images/csdirector-cstruss/resources/images/ts-bearings-oh-support.png)

Truss Studio looks for the next bearing inside of that one to be the exterior wall; the bottom chord gets wind load applied as if it was a cantilever.

1. To verify this, open Loads View to view a left-to-right wind load combination and check the wind load applied under the BC. An example is shown below.


![](/images/csdirector-cstruss/resources/images/ts-bearings-oh-support-loadsview.png)

Additionally, a note displays on the truss drawing.

**Related Topics**

[Overhangs](/csdirector-cstruss/help-center/design-view/overhangs)

[Bearings](/csdirector-cstruss/help-center/design-view/bearings/bearings)