# Manually Edit End Conditions

**Purpose**

Trusses may be imported from layout with undesirable end conditions that may result in errors when analyzing. You can manually edit end conditions.

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon-36x36.png) Watch video - Joint Geometry (Web Pass-thru)

![](/images/csdirector-cstruss/resources/images/video-icon-36x36.png) Watch video - End Description dialog (Bearing Block)

To manually edit end conditions, use one of the following:

- Joint Geometry dialog
- End Condition dialog


Example 1 - Use Joint Geometry dialog

An example of a truss with an undesirable end condition:

![](/images/csdirector-cstruss/resources/images/ts-endcondtion-editmanually1-808x532.png)

1. Edit the **BC Profile** command to **4e** and press **Enter**; the bottom chord runs to the end of the truss, eliminating the small seat cut.


![](/images/csdirector-cstruss/resources/images/td-editendcond-bcprofile-865x609.png)

1. Select the joint.
2. From the **Joint** menu select **Joint > Joint Geometry**, or click ![](/images/csdirector-cstruss/resources/images/joint-geometry-button-31x32.png) , or right-click to display menu and select **Joint Geometry**.


![](/images/csdirector-cstruss/resources/images/ts-webpassthru.png)

1. Under **Interior Chord Joints**, select **Web Pass thru** and click **OK**.


The resulting end condition, shown below, analyzes correctly.

![](/images/csdirector-cstruss/resources/images/ts-webpassthruresult.png)

**Example 2- Use End Description dialog**

In this example, the end condition show below is undesirable.

![](/images/csdirector-cstruss/resources/images/ts-editendcond-2nd-example-error.png)

1. Edit the **BC Profile** command to **4e** and press Enter; the bottom chord runs to the end of the truss.
2. Click **Right End Desc** to open the **End Desc – Right** dialog.
3. Uncheck **Use automatic settings**.


![](/images/csdirector-cstruss/resources/images/ts-editendcond-second-error-solution.png)

1. Click **Brg Block** to enable the setting.
2. Adjust top and bottom measure.
3. Click **Apply to Right**.


The end condition is changed.

![](/images/csdirector-cstruss/resources/images/ts-editendcond-second-end-condition-final.png)

You can also set the Bot Y Measure to 0, to achieve a similar result to the end condition described in Example 1.

![](/images/csdirector-cstruss/resources/images/ts-editendcond-second-solution-zero.png)

![](/images/csdirector-cstruss/resources/images/ts-editendcond-second-solution-vert.png)

You can adjust the Bot Y-Measure to allow for additional end condition configurations.

![](/images/csdirector-cstruss/resources/images/ts-editendcond-3rd-example.png)

![](/images/csdirector-cstruss/resources/images/ts-editendcond-3rd-result.png)

**Related Topics**

[Edit Joint Geometry](/csdirector-cstruss/help-center/truss-studio-online-help/edit-joints/joint-geometry)

[End Conditions/Descriptions](/csdirector-cstruss/help-center/design-view/end-description)