# Edit Fastener Settings

**Purpose**

Define fasteners for trusses. You can also use cluster fastening for point loads, if required.

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon-41x42.png) Watch video

To use the Edit Fastener option:

1. From the **Environment** menu, select **Edit Env Data**.
2. Click **Edit Fastener Settings**.
![](/images/csdirector-cstruss/resources/images/ts-editfastenersbutton-508x235.png)
The **Edit Fasteners** window displays. A sample is shown below.


![](/images/csdirector-cstruss/resources/images/ts-multiplytrussfasteners.png)

1. From the drop down lists, select a fastener/alternate fastener type. Then enter/change the maximum spacing override in inches or the maximum number of nails. Click **OK** to save your changes.


![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) **Notes:**

- Head Side Loading - In some cases, you may be able to select whether you want to use Head Side Loading. With this option, you can specify whether the loaded side of the girder aligns with the head side or tip side of the fastener, *if the fastener type is an SDW screw*. Only 3-ply and 4-ply SDW screws have a different design value (depending on loading configuration) which reduces the number of fasteners required if Head Side Loading is selected. Using this option results in a note on the truss drawing, making head side screw installation required.  ![](/images/csdirector-cstruss/resources/images/ts-headsideloading-graphic.png)
- 2-ply and 3-ply trusses - For these trusses, you can also select alternative fasteners, in the event that the selected fasteners above do not work.
- Web - You can select a different type of fastener for webs (different from fasteners used on chords).
- Alternate Fasteners & Triggers - Specify alternate fasteners to use during different loading conditions.
  - For **Max No Nails**, you can specify the maximum number of nails that can be called out in a fastener cluster before switching to the alternate fastener you specified in the dropdown list to the left.
  - For **Min Spacing (in.),** you can specify minimum spacing of ply-to-ply nails before switching to the alternate fastener you specified in the dropdown list to the left.
- This functionality is not yet available for Canadian customers, but is planned for a future release.