# Edit Floor Truss Zones

**Purpose**

The Edit Zones command allows for a more intuitive and efficient way to edit Wx2 trusses, specifically Chases, Truss Webbing, and Verticals.

Functionality along the bottom chord of the truss allows you to add/remove webs with one click. You can also click the arrows to change the webbing direction.

**Steps**

1. Create or open a floor truss.
2. Select **Operations** > **Edit Zones**.


Lines appear above and below different zones on the floor truss.

![](/images/csdirector-cstruss/resources/images/ts-zonehandle-1015x125.png)

1. Click a line above a zone.


## Edit Chases

In the following procedure, the line above the first chase opening is selected.

The **Chase** zone dialog displays, indicating the chase specifications.

![](/images/csdirector-cstruss/resources/images/ts-zonechasedialog-1052x261.png)

1. Adjust the chase settings.


You can also view and edit the following for the chase in this dialog:

- Reference - where the location is measured to; Left Edge, Center, or Right Edge of the chase opening.
- Measured From - Left of truss, Center of truss, or Right of truss
- Chase Type - Fixed, Flexible, Floating. Chase location for both Flexible and Floating chases adjust to optimize webbing.
- Flexible changes the width of the chase to optimize the webbing.
- Floating keeps the chase at the set width.
- Flexible provides the best webbing result, but if the chase must be a certain size (Floating) or in a specific location (Fixed), a different option must be used.


![](/images/csdirector-cstruss/resources/images/ts-zonechasereference.png)

You can undo any changes while in the command, but once you exit Edit Zones Mode you cannot undo the changes without changing the Web Profile Command script.

1. Click **OK** to save and apply settings.


When the settings are applied, the information on the Web Profile line changes to reflect edits made in the dialog.

Clicking **Delete** while the chase is selected removes the chase from the floor truss.

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) **Note:** You can also create a new chase by pressing **C**. In that case, a new **Chase** dialog displays and you can enter all information for the new vertical.

## Edit Verticals

In the following procedure, the line above the vertical web is selected.

The **Vertical** dialog displays, indicating the vertical specifications.

![](/images/csdirector-cstruss/resources/images/ts-zonevertical-1051x336.png)

1. Adjust the vertical settings.


Depending on the vertical location, not all settings are editable.

Note that the Stiff Back options let you apply strongbacks and define their locations

![](/images/csdirector-cstruss/resources/images/ts-zoneverticalnew.png)

You can undo any changes while in the command, but once you exit Edit Zones Mode you cannot undo the changes without changing the Web Profile Command script.

1. Click **OK** to save and apply settings.


When the settings are applied, the information on the Web Profile line changes to reflect edits made in the dialog.

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) **Note:** You can also create a new vertical if you press **V**. In that case, a new **Vertical** dialog displays and you can enter all information for the new vertical.

Clicking **Delete** while the chase is selected removes the chase from the floor truss.

## Edit Truss Webbing

In the following procedure, the line above the truss webbing to edit is selected.

The **Zone** dialog displays, indicating the webbing specifications.

![](/images/csdirector-cstruss/resources/images/ts-zonetrusswebbing-1051x192.png)

1. Adjust the webbing settings.


You can change the following:

- Panel Length
- Web Style
- Web Direction
- Web Start At


You can undo any changes while in the command, but once you exit Edit Zones Mode you cannot undo the changes without changing the Web Profile Command script.

1. Click **OK** to save changes.


When the settings are applied, the information on the Web Profile line changes to reflect edits made in the dialog.

## Add/Delete Webs

Click a line along the bottom chord of the truss to add or delete webs.

- Left-click adds webs
- Right-click removes webs


## Change Web Direction

Click the orange arrows to change webbing direction.

![](/images/csdirector-cstruss/resources/images/ts-zonechangewebbingdir-1015x424.png)

**Related Topics**