# Fire Treated Materials

Truss Studio offers several options for trusses that require fire-treated materials.

- The EnvData > OneTrussControls > Fire Treated Overhangs settings allows you to automatically use fire-treated material from the current lumber inventory for exposed overhang members only.
- If the EnvData setting for OneTrussControls > Treated Lumber used is set to false, but fire-treated lumber is used anywhere in the truss (overhangs or anywhere else) Truss Studio now recognizes the pieces that are fire-treated and automatically uses the specified plating reduction for Plating > OverallCriteria > Treated Lumber tooth holding reduction factor (Fire-Retardant, other) for calculating the plating on only those treated materials; all other materials not using fire-treated material do not use that reduction. If that EnvData setting is set to true, all materials on the truss (whether specifically indicated as fire-treated or not) receive the plating reduction.
- You can automatically insert a splice block for raised heel (stub-end) trusses when a splice joint is present. You can still manually insert a splice block for other heel conditions, such as 4-sided wedge heels. This feature improves the speed and accuracy of truss design with fire-treated overhangs by reducing manual intervention and ensuring compliance with structural requirements.