# Generate QC Report

**Purpose**

Use this report to verify that plates are correctly placed on joints.

**Steps**

Generate a QC report on a single truss design from Truss Studio

1. Double-click a component to open it in Truss Studio.
2. From the **Entry Mode** menu, select **Output**.
3. Browse to the following location C:\SST\Client\RG_Files
4. Open **QCReport.RGT** & click **Open**.


The report displays.

A portion of a sample report for a joint is shown below.

![](/images/csdirector-cstruss/resources/images/ts-qc-sample-output-995x687.png)

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png)**Note:** The joints included in the reports generated from both Truss Studio and Director have a JSI > 0.80; however, if you want to include other joints, you can select the joints on the truss. On the Properties pane, indicate the joints to be included in the QC Report.

![](/images/csdirector-cstruss/resources/images/d-qcreport-properties-pane.png)

Generate a QC report on a single truss design from CS Director

1. Browse to the **Components** area in Director.
2. Click to highlight the component for which you want to generate a QC Report.
3. On the **Reports** menu, click **QC Report**.


![](/images/csdirector-cstruss/resources/images/d-qc-report-select.png)

The QC report is generated. See the partial sample report shown above.

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png)**Note:** The joints included in the reports generated from both Truss Studio and Director have a JSI > 0.80; however, if you want to include other joints, you can select the joints on the truss. On the Properties pane, indicate the joints to be included in the QC Report (see above).

**Related Topics**