# Hip Girder Drop

**Purpose**

There is often a need to

drop the flat top chord height of

step down hip trusses to allow for a

lay-in gable or

purlins that are installed in the field. The

Hip Drop command provides a method for dropping the flat top chord height correctly on hip girders.

In some cases, you may not want to drop the flat top chord on the hip girder at all, but want all of the other hip trusses to be dropped. This feature also allows you to perform that function.

**Prerequisites**

An existing hip girder

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon-34x35.png) Watch video

There are two methods for creating a hip drop girder:

**Method 1 - Drop the step down hip girder flat top chord in Design view**

1. Enter the span dimension in the **Span** line and the top chord profile in the **TC Profile** line. See the example below.


![](/images/csdirector-cstruss/resources/images/ts-hipdrop-ex1-719x334.png)

1. Enter the Hip Drop (HD) command on the **TC Profile** line.


![](/images/csdirector-cstruss/resources/images/ts-hipdrop-ex2.png)

Partial option

Note that if you use the P (partial) option, the syntax for calculating the partial hip girder drop is:

hd (#1) (#2) (p)

- #1 = size of drop
- #2 = pitch to use to calculate the drop
- p = hip girder drop


The flat top chord is dropped to the correct height. Note that the hip drop girder dimension is only calculated if you use the P option. An example is shown below.

![](/images/csdirector-cstruss/resources/images/ts-hipdropex3-588x235.png)

**Method 2 - Create a hip set with dropped flat top chords using the Hip Set dialog**

1. From the **Truss Placement** menu in Layout, select **Hip Set** or click ![](/images/csdirector-cstruss/resources/images/ts-hipsetbutton.png).


The **Hip Set Dialog** displays.

![](/images/csdirector-cstruss/resources/images/ts-hipsetdialog-362x371.png)

1. From the **Style** drop down list, select either **Step Down** or **Atlantic** hip set type (hip girder drop options are available only for these hip types).


![](/images/csdirector-cstruss/resources/images/ts-hipset-style-361x374.png)+

Under the **Hip Girder Drop** options, there are three choices:

- Full = the hip girder and all of the hip trusses are dropped the full amount. All of the hip trusses, including the hip girder, are dropped using the dimension and pitch indicated for the **Hip Drop**.
- Partial= the hip girder is dropped based on the formula in Method 1, shown above. All secondary hip trusses are dropped using the dimension and pitch input for the **Hip Drop**. The secondary hip trusses are dropped the same amount for all three options.
- None= the flat top chord on the hip girder is not dropped, but all of the secondary hip trusses are dropped using the dimension and pitch input for the **Hip Drop**.


![](/images/csdirector-cstruss/resources/images/ts-hipgirderdrop-363x377.png)

1. Select a hip girder drop.
2. Define **Truss Label** options.
3. Click **OK** to save changes on this dialog.


The prompt is displayed: ![](/images/csdirector-cstruss/resources/images/ts-hipsetgirderprompt.png)

1. Select the front wall.


The hip set is created with the correct hip drop on the girder truss.

See examples

![](/images/csdirector-cstruss/transparent.gif)Full drop

![](/images/csdirector-cstruss/resources/images/ts-fulldrop-742x117.png)

Partial drop

![](/images/csdirector-cstruss/resources/images/ts-partialdrop-764x129.png)

**Related Topics**

[Create Hip Girder Loads](/csdirector-cstruss/help-center/design-view/loading/hip-girder-loading)

[Label Trusses - Preset Labels](/csdirector-cstruss/help-center/layout-view/labels/labeltrussespresetlabels)