# Inspect Plates

**Purpose**

Display each program-attempted plate size/orientation on-screen, and pause before moving to the next plate. Verify each placement on a truss and adjust as needed.

**Steps**

1. Select a plate on a truss and click **Move Plate**.
2. From the **Properties** pane, select **Inspect**.


![](/images/csdirector-cstruss/resources/images/ts-inspecplateoption-1084x533.png)

A dialog displays where you can do the following:

![](/images/csdirector-cstruss/resources/images/ts-inspectplates.png)

- Select **Minimum Plate Width** - Select the plate width from the dropdown list.
- 18-ga only - select this option to find only 18-gauge plates.
- Start - start the Inspect Plate process. Once you click Start, the **Previous Plate** option appears on the dialog.
- Next/Previous Plate - move to the next/previous plate
- Passed Only - When checked, this option shows only those plates that pass analysis. If no plate is found, the joint remains unplated. You can select/unselect this option at any point in the Inspect process.
- OK - keep the current plate in its location on the truss
- Cancel - End the Inspect Plate process without making any changes


1. Click and drag or rotate a plate to adjust its position while using the Inspect tool, and/or use the arrow keys to move the plate on the joint.


Each time the application moves to another plate, the information for that plate displays in the Properties dialog.

**Note:** If you select Move Plate first, while you are working through different plate sizes and orientations, Truss Studio allows you to click and drag the plate (or rotate) with the mouse while you are still in the Inspect tool, and/or use the arrow keys to move the plate on the joint. If you do not use Move Plate, you will not be able to move a plate around on the joint until you exit the Inspect tool.

**Related Topics**