# Merge & Adjust Plates

**Purpose**

Occasionally there are situations where two joints are so close together (typically, one is a TC joint and the other is a BC joint, or two nearby hip joints on a short flat TC) that there is no way to avoid the two joint plates from overlapping. This solution lets you easily adjust and resize plates, allowing for a single plate solution.

Plate Merging options are defined in EnvData. See [Merge Plates settings](/csdirector-cstruss/help-center/truss-studio-online-help/env-data-settings/merge-plates-settings).

**Prerequisites**

An existing truss

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon-35x36.png) Watch video - Plating Improvements

![](/images/csdirector-cstruss/resources/images/video-icon-35x36.png) Watch video - Merge Plates

![](/images/csdirector-cstruss/resources/images/video-icon-35x36.png) Watch video - Change Multiple Plates

There are two ways to merge and adjust plates that are close to each other or overlapping.

Method 1

1. Select the plate that is adjacent or overlapping another plate.
2. Resize the plate using the Plate drop down list on the Properties window.


![](/images/csdirector-cstruss/resources/images/ts-platemonitoroption-202x499.png)

1. Using the **Joint** > **Move Plate** command adjust the plate so that it covers both joints.
2. Analyze the truss.


When the truss is analyzed, the second, redundant plate is discarded.

To undo this function, select **Reset** from the Plate drop down list in the Properties window.

![](/images/csdirector-cstruss/resources/images/ts-platereset-202x406.png)

Method 2

1. Select both joints.
2. Select the same plate size for both, using the **Change All** option in the Properties window.


![](/images/csdirector-cstruss/resources/images/ts-platechangealloption-204x410.png)

1. Move one plate until it “snaps” to the orientation of the other, and then move the plate until it is positioned such that it works to satisfy both joints.


The plates are merged and a single plate is used for the joints.

![](/images/csdirector-cstruss/transparent.gif)Example 1

4x7 and 5x10 plates are merged (plates to merge are selected)

![](/images/csdirector-cstruss/resources/images/ts-mergeplates-ex1-464x243.png)

![](/images/csdirector-cstruss/resources/images/ts-mergeplates-ex2-487x252.png)

![](/images/csdirector-cstruss/resources/images/ts-mergeplates-ex3-500x266.png)

![](/images/csdirector-cstruss/resources/images/ts-mergeplates-ex4-519x283.png)

![](/images/csdirector-cstruss/transparent.gif)Example 2

![](/images/csdirector-cstruss/resources/images/ts-mergeplates2-ex1-601x209.png)

![](/images/csdirector-cstruss/resources/images/ts-mergeplates2-ex2-611x233.png)

![](/images/csdirector-cstruss/resources/images/ts-mergeplates2-ex3.png)

Note: You can also merge plates on the following:

![](/images/csdirector-cstruss/transparent.gif)- Manually input structural webs

![](/images/csdirector-cstruss/resources/images/ts-mergeplateimprovement-1004x376.png)

![](/images/csdirector-cstruss/transparent.gif)- Horizontal webs created by filler pieces meeting at a web

The following setting must be True: EnvData > Plating > MergePlates > Merge plates at pass-through webs.

![](/images/csdirector-cstruss/resources/images/ts-horizwebsmergeplates-1143x303.png)

![](/images/csdirector-cstruss/transparent.gif)- Non-structural boards across a chord or filler chord

The following setting must be True: EnvData > Plating > MergePlates > Merge plates at pass-through chords.

![](/images/csdirector-cstruss/resources/images/ts-vertwebsmergeplates-1187x371.png)

**Related Topics**

[Change Plates](/csdirector-cstruss/help-center/design-view/plate-monitor/change-plates)