# Plate Long Scarf Heels

**Purpose**

Easily plate long scarf heel with one or multiple plates. Specify the longest acceptable scarf for a single plate and double plate solution separately.

**Prerequisites**

An existing truss

**Steps**

1. Highlight the long scarf heel joint that you want to plate.
2. On the **Properties** grid, select the number of plates for the joint.


![](/images/csdirector-cstruss/resources/images/ts-numberplatespropertiesgrid-355x381.png)

The specified number of plates is added.

![](/images/csdirector-cstruss/transparent.gif)

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) **Note:** Long scarf heels can be plated with 1, 2, or 3 plates

You can specify the longest acceptable scarf for a single plate and a double plate solution separately. You can only increase the number of heel plates, not decrease, in the Properties grid, based on the specified EnvData limits.

When there are three plates on a heel, in the Properties grid, they are labeled as Outer Heel Plate, Inner Heel Plate, and Middle Heel Plate. All three are selected when the heel joint is selected; you change the size or location of any of them and this labeling can be helpful.

Note that the available options are based on your EnvData settings. Therefore, if the maximum length for one plate is 2’, for example, then any scarf longer than that will require 2 or 3 plates, and you will not be able to select a single plate. Similarly, for the limit for 2 plates – if the scarf is longer than that, then 3 plates will be required.

![](/images/csdirector-cstruss/resources/images/ts-oneplateexample.png) ![](/images/csdirector-cstruss/resources/images/ts-twoplateexample.png) ![](/images/csdirector-cstruss/resources/images/ts-threeplateexample.png)

**Related Topics**