# Create a Reference Line with Two Points

**Purpose**

Snap points give you the ability to select a point directly rather than selecting two lines and the intersection of those lines to define a point to use for dimensions or to create additional objects. This feature greatly reduces the number of mouse clicks required.

You can create a reference line through two points.

**Prerequisites**

Snap points are only available if you are in a command where snap points can be used.

**Steps**

To create a reference line through two points:

1. Select **Reference Lines** > **Through 2 Points** or click ![](/images/csdirector-cstruss/resources/images/ref-line-two-points-button-33x33-30x30.png) on the Layout-Ref Line toolbar.


The Reference Line prompt displays at the top of the layout window.

![](/images/csdirector-cstruss/resources/images/ref-line-prompt-2-points-731x20.png)

1. Select a point using snap points or select two lines that intersect at a point. If you want to offset the point from the original selection, press the space bar before selecting the point; then select the point.


A red **X** indicates the selected point. If you press the space bar before selecting a point, the **Offset Point** dialog displays.  ![](/images/csdirector-cstruss/resources/images/offset-point-dialog-279x199-279x199.png) ![](/images/csdirector-cstruss/resources/images/offset-point-dialog-with-pitch-282x201.png)   Input the offset dimension to move the point and click **OK**. The red **X** moves to the offset location. If you click **Cancel**, the dialog is closed and the point remains at the location you selected.

1. Select a second point.


A reference line is displayed that intersects the two selected points.

**Related Topics**

[Snap Points with Dimensions](/csdirector-cstruss/help-center/truss-studio-online-help/use-dimensions/snap-points-with-dimensions)

[Snap Points with Temporary Dimensions](/csdirector-cstruss/help-center/truss-studio-online-help/use-dimensions/snap-points-with-temporary-dimensions)

[Snap Points with Reference Lines](/csdirector-cstruss/help-center/design-view/reference-and-work-lines/snap-points-with-reference-lines)