# Create Reference Lines (Snap Points)

**Purpose**

Snap points give you the ability to select a point directly rather than selecting two lines and the intersection of those lines to define a point to use for dimensions or to create additional objects. This feature greatly reduces the number of mouse clicks required.

You can create a Point - Parallel Reference Line or a Point - Perpendicular Reference Line.

This command available in both Truss Studio - Layout and Design.

**Prerequisites**

Snap points are only available if you are in a command where snap points can be used.

**Steps**

To create a Point - Parallel Reference Line:

1. Select Reference Lines and then select Through Pt - Par. Alternatively, you can click the Pt - Par button on the Layout-Ref Line toolbar.


The Reference Line prompt displays at the top of the layout window.

![](/images/csdirector-cstruss/resources/images/ref-line-prompt-779x19.png)

1. Select a point using snap points or select two lines that intersect at a point. If you want to offset the point from the original selection, press the space bar before selecting the point; then select the point.


A red X indicates the selected point. If you press the space bar before selecting a point, the Offset Point dialog is displayed.  ![](/images/csdirector-cstruss/resources/images/offset-point-dialog-279x199-279x199.png) ![](/images/csdirector-cstruss/resources/images/offset-point-dialog-with-pitch-282x201.png)   Input the desired offset dimensions to move the point and click OK. The red X moves to the offset location. If you click Cancel, the dialog is closed and the point remains at the location you selected.

1. Select a parallel line.


A reference line is displayed through the point selected in step 2 and parallel to the line selected in step 3.

To Create a Point - Perpendicular Reference Line:

Follow the same procedure outlined above, but select Through Pt - Perp from the Reference Lines menu. Alternatively, you can click the Pt - Perp button on the Layout-Ref Line toolbar. Instead of selecting a parallel line in step 3 above, select a perpendicular line.

**Related Topics**

[Snap Point to Set Origin](/csdirector-cstruss/help-center/layout-view/snap-points/snap-point-to-set-origin)

[Snap Points with Dimensions](/csdirector-cstruss/help-center/truss-studio-online-help/use-dimensions/snap-points-with-dimensions)

[Snap Points with Temporary Dimensions](/csdirector-cstruss/help-center/truss-studio-online-help/use-dimensions/snap-points-with-temporary-dimensions)