# Ripped Tail Cut

**Purpose**

Ability to apply ripped tail cut to oversize boards

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon.png) Watch video

1. Open the truss you want to edit.


In the example below, the top chord is 2x6 (larger than default size) and the bottom has a 2x4 heel height.

![](/images/csdirector-cstruss/resources/images/ts-riptail-girdcutheel-881x465.png)

1. Open the **End Description-Left** dialog and select the **Ripped Tail** option. You may need to uncheck **Use automatic settings** to access the available options.


![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) **Note**: You can define this setting as the default (without using the End Desc dialog) by editing the setting at **EnvData** > **Geometry** > **Geom2xW** > **EndConditions 2xW** > **Use Girder Cut or Ripped Tail**.

![](/images/csdirector-cstruss/resources/images/ts-enddesc-ripped.png)

1. Click **Apply to Left** **& Right**.


The 2x6 tail is cut down to 2x4. The bottom chord is cut the same as if the top chord was a 2x4.

![](/images/csdirector-cstruss/resources/images/ts-riptail-result-850x325.png)

Note that you can use this cut even if there is no overhang.

![](/images/csdirector-cstruss/resources/images/ts-riptailnooverhang.png)

Special plating rules apply to ripped tail end conditions. A plate must cover the area where the two points meet, as shown below.

![](/images/csdirector-cstruss/resources/images/ts-riptailplating.png)

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) **Notes**:

- A 2x6 ripped down to 2x4 is analyzed as a 2x4. This board is considered weaker than a regular 2x4 of the same species/grade since the board has been ripped down.
- A ripped tail cut may also be applied to rafters. Single rafters that have been ripped down require a plate to control shear.  ![](/images/csdirector-cstruss/resources/images/ts-riptail-platedrafter.png)


![](/images/csdirector-cstruss/transparent.gif)**Additional Examples**

| ![](/images/csdirector-cstruss/resources/images/ts-riptail-2x6-499x218.png) | ![](/images/csdirector-cstruss/resources/images/ts-riptail-2x6plated-493x209.png) |
|  --- | --- |
| ![](/images/csdirector-cstruss/resources/images/ts-riptail-2x8-520x171.png)
![](/images/csdirector-cstruss/resources/images/ts-riptail-2x8-to-2x6-505x293.png)
 |  |


**Related Topics**