# Use Staples on Non-Structural Vertical Webs

**Purpose**

Use staples on non-structural vertical webs, including gables, fillers, and non-structural boards added with Add Boards

**Prerequisites**

An existing truss

You must define staple options in EnvData > Plating > [Overall Criteria settings](/csdirector-cstruss/help-center/truss-studio-online-help/env-data-settings/overall-criteria-settings).

See Gable Stud Stapling Detail for more information.

**Steps**

1. Open a truss containing non-structural vertical webs.
2. Select the non-structural vertical web you want to staple.


![](/images/csdirector-cstruss/resources/images/ts-nonstructverttruss-741x306.png)

1. From the **Properties** window, select the **Plates** option.
2. Select **Stapled** from the drop down list.


![](/images/csdirector-cstruss/resources/images/ts-stapledoption-1032x307.png)

Staples are added at the specified location.

![](/images/csdirector-cstruss/resources/images/ts-stapleexample-841x375.png)

**Related Topics**

[Overall Criteria settings](/csdirector-cstruss/help-center/truss-studio-online-help/env-data-settings/overall-criteria-settings)