# Batching Example - No Label Consolidation, Saw Files Consolidate at the Project Level

![](/images/csdirector-cstruss/images/icons/d-videossttraining.png) **Watch video**

**Purpose**

This example covers the steps necessary to configure your Presets to allow No Label Consolidation, Saw Files Consolidated at the Project Level. This example shows an Assembly report after the Presets have been defined.

**Steps**

No Label Consolidation, Saw Files Consolidate at the Project Level

1. In the main **Project List** window, select **Presets**.
2. Select **Piece Labeling and Sequencing**.


Multiple options display in the right-hand window. Options the you select from the **Cutting Output Consolidation By** drop down list determine what additional options display in the rest of the window.

![](/images/csdirector-cstruss/images/d-simplifiedbatching1-1229x719.png)

1. For this example, under **Process Unit** > **Cutting Output Consolidation By**, select **Project**, so the saw consolidates pieces across projects, even if they don't have the same name.


![](/images/csdirector-cstruss/images/d-processunit1.png)

1. For Piece Labeling and Sequencing, so the boards start with T, B, W and G, select the following:


- For **Piece Label Prefix**, select **TBWGO Top Chord: T Top Chord Overhang = T Bottom Chord = B Web = W Top Scab = T Bottom Scab = B Wedge = W Gable = G Other = O Slider = W**, so the boards start with T, B, W, G, and O.


![](/images/csdirector-cstruss/images/d-piecelabelprefix1.png)

1. For the **Piece Sequencing**, select the following:


- Select **Restart Sequence At** > **Truss**, to restart the numbering at every new truss.
- Select **Restart per Piece Type**, to have each piece type start with a number 1 .
- Select **Chord Labeling Sequence** > **Left to Right Position on Truss**, so the piece on the left side starts with 1 and continues across the truss so highest number ends on the right side.
- Select **Web Labeling Sequence** > **Left to Right Position on Truss**, so the piece on the left side starts with 1 and continues across the truss so highest number ends on the right side.


![](/images/csdirector-cstruss/images/d-piecesequencereset1.png)

1. Select **Piece Label Consolidation** > **No Consolidation**, so that it does not consolidate any of the same pieces with the same name.


![](/images/csdirector-cstruss/images/d-piecelabelconsolidation1.png)

1. Click **Close**.
2. After Presets are configured, select **Tools** > **Batch Process** and click **Process**.


![](/images/csdirector-cstruss/images/d-batchprocessingexample2.png)

1. This is an example of an Assembly report with No Label Consolidation, Saw Files Consolidate at the Project level.


![](/images/csdirector-cstruss/images/d-assemblyreportexample1.png)

**Related Topics**

- [Batching: Consolidation, Piece Labeling & Sequencing](/csdirector-cstruss/help-center/director-online-help/batching/d-batching-piecelabelsequence)
- [Batching Example - Consolidation of Labels and Saw Files Across the Project](/csdirector-cstruss/help-center/director-online-help/batching/d-batchingexample2-consolidatelabelssawfilesacrossproject)
- [Batching Example - No Label Consolidation, Saw Files Consolidate Per Truss](/csdirector-cstruss/help-center/director-online-help/batching/d-batchingexample3-nolabelconsolidationlabelssawfilesconsolidatepertruss)
- [Batching Example - Consolidation of Saw File per Group, Consolidation of Piece Label per Truss with Number Restart per Group R1, B1, W1](/csdirector-cstruss/help-center/director-online-help/batching/d-batchingexample4-consolidatesawfilepergroupconsolidatepiecelabelpertruss)