# Batching Example - Consolidation of Labels and Saw Files Across the Project

![](/images/csdirector-cstruss/images/icons/d-videossttraining.png) **Watch video**

**Summary**

This example covers the steps necessary to configure your Presets to allow for Consolidation of Labels and Saw Files Across the Project. This is an example of the Assembly report after the Preset edits.

**Steps**

Consolidation of labels and saw files across the Project

1. In the main **Project List** window, select **Presets**.
2. Select **Piece Labeling and Sequencing**, and information displays to the right.


The **Preset Manager** > **Fabrication** > **Piece Labeling and Sequencing** window below displays the selections used to produce this example.

![](/images/csdirector-cstruss/images/d-simplifiedbatching2-1014x585.png)

1. For **Process Unit** > **Cutting Output Consolidation By**, select **Project**, so **Cutting Output Consolidation** will be by **Project**.


![](/images/csdirector-cstruss/images/d-processunit2.png)

1. For **Piece Labeling and Sequencing**, select the following:


- For **Piece Label Prefix**, select **Custom Prefix for All** and remove any prefix if prepopulated. This will result in a count of all pieces i.e. 1,2....4,5.......


![](/images/csdirector-cstruss/images/d-piecelabelprefix2.png)

1. For the **Piece Sequencing**, select the following:


- Select **Restart Sequence At** > **Cutting Output Consolidation**, so label sequencing is consistent with saw file consolidation.
- Select **Chord Labeling Sequence** > **Based on Saw Sort Criteria (i.e. first cut board would get #1)**, so the piece is numbered in order of the saw sort.
- Select **Web Labeling Sequence** > **Based on Saw Sort Criteria (i.e. first cut board would get #1)**, so the piece is numbered in order of the saw sort.


![](/images/csdirector-cstruss/images/d-piecesequencereset2.png)

- Check **Inside out when symmetric**.


![](/images/csdirector-cstruss/images/d-insideoutwhensymmetric-checked.png)

1. Select **Piece Label Consolidation** > **Cutting Output Consolidation**, so that label consolidation is consistent with the saw file.


![](/images/csdirector-cstruss/images/d-piecelabelconsolidation2.png)

1. Click **Close**.
2. After Presets are configured, select **Tools** > **Batch Process** and click **Process**.


![](/images/csdirector-cstruss/images/d-batchprocessingexample2.png)

1. This is an example of an Assembly report with Consolidation of Labels and Saw files Across the Project.


![](/images/csdirector-cstruss/images/d-assemblyreportexample2.png)

**Related Topics**

- [Batching: Consolidation, Piece Labeling & Sequencing](/csdirector-cstruss/help-center/director-online-help/batching/d-batching-piecelabelsequence)
- [Batching Example - No Label Consolidation, Saw Files Consolidate at the Project Level](/csdirector-cstruss/help-center/director-online-help/batching/d-batchingexample1-nolabelconsolidationsawfilesconsolidateatproject)
- [Batching Example - No Label Consolidation, Saw Files Consolidate Per Truss](/csdirector-cstruss/help-center/director-online-help/batching/d-batchingexample3-nolabelconsolidationlabelssawfilesconsolidatepertruss)
- [Batching Example - Consolidation of Saw File per Group, Consolidation of Piece Label per Truss with Number Restart per Group R1, B1, W1](/csdirector-cstruss/help-center/director-online-help/batching/d-batchingexample4-consolidatesawfilepergroupconsolidatepiecelabelpertruss)