# Batching Example - No Label Consolidation, Saw Files Consolidate Per Truss

![](/images/csdirector-cstruss/images/icons/d-videossttraining.png) **Watch video**

**Summary**

This example covers the steps necessary to configure your Presets to allow for No Label Consolidation, Saw Files Consolidate Per Truss. This is an example of the Assembly report with the applied settings.

**Steps**

No Label Consolidation, Saw Files Consolidate per Truss

1. In the main **Project List** window, select **Presets**.
2. Select **Piece Labeling and Sequencing**, and information displays to the right.


The **Preset Manager** > **Fabrication** > **Piece Labeling and Sequencing** window below displays the selections used to produce this example.

![](/images/csdirector-cstruss/images/d-simplifiedbatching3-1087x627.png)

1. For **Process Unit** > **Cutting Output Consolidation By**, select **Truss** so the saw file groups pieces by truss.


![](/images/csdirector-cstruss/images/d-processunit3.png)

1. For **Piece Labeling and Sequencing**, select the following:


- For **Piece Label Prefix**, select **TBWGO Top Chord: T Top Chord Overhang = T Bottom Chord = B Web = W Top Scab = T Bottom Scab = B Wedge = W Gable = G Other = O Slider = W**, so the boards start with T, B, W, G, and O.


![](/images/csdirector-cstruss/images/d-piecelabelprefix3.png)

1. For the **Piece Sequencing**, select the following:


- Select **Restart Sequence At** > **Cutting Output Consolidation**, to have the numbering match the Saw file consolidation set in Process Unit.
- Select **Restart per Piece Type**, to have each piece type start with a number 1 .
- Select **Chord Labeling Sequence** > **Left to Right Position on Truss**, so the piece on the left side starts with 1 and continues across the truss so highest number ends on the right side.
- Select **Web Labeling Sequence** > **Left to Right Position on Truss**, so the piece on the left side starts with 1 and continues across the truss so highest number ends on the right side.


![](/images/csdirector-cstruss/images/d-piecesequencereset3.png)

1. Select **Piece Label Consolidation** > **No Consolidation**, so that no labels have consolidation.


![](/images/csdirector-cstruss/images/d-piecelabelconsolidation3.png)

1. Click **Close**.
2. After Presets are configured, select **Tools** > **Batch Process** and click **Process**.


![](/images/csdirector-cstruss/images/d-batchprocessingexample2.png)

1. This is an example of a Truss Assembly report with No Label Consolidation, Saw Files Consolidate Per Truss.


![](/images/csdirector-cstruss/images/d-assemblyreportexample3.png)

**Related Topics**

- [Batching: Consolidation, Piece Labeling & Sequencing](/csdirector-cstruss/help-center/director-online-help/batching/d-batching-piecelabelsequence)
- [Batching Example - No Label Consolidation, Saw Files Consolidate at the Project Level](/csdirector-cstruss/help-center/director-online-help/batching/d-batchingexample1-nolabelconsolidationsawfilesconsolidateatproject)
- [Batching Example - Consolidation of Labels and Saw Files Across the Project](/csdirector-cstruss/help-center/director-online-help/batching/d-batchingexample2-consolidatelabelssawfilesacrossproject)
- [Batching Example - Consolidation of Saw File per Group, Consolidation of Piece Label per Truss with Number Restart per Group R1, B1, W1](/csdirector-cstruss/help-center/director-online-help/batching/d-batchingexample4-consolidatesawfilepergroupconsolidatepiecelabelpertruss)