# Batching Example - Consolidation of Saw File per Group, Consolidation of Piece Label per Truss with Number Restart per Group R1, B1, W1

![](/images/csdirector-cstruss/images/icons/d-videossttraining.png) **Watch video**

**Summary**

This example covers the steps necessary to configure your Presets to allow for Consolidation of Saw File per Group, Consolidation of Piece Label per Truss with Number Restart per Group R1, B1, W1. This is an example of the Assembly report with the applied settings.

**Steps**

Consolidation of Saw File per Group, Consolidation of Piece label per Truss with Number Restart per Group R1, B1, W1

1. In the main **Project List** window, select **Presets**.
2. Select **Piece Labeling and Sequencing**, and information displays to the right.


The **Preset Manager** > **Fabrication** > **Piece Labeling and Sequencing** window below displays the selections used to produce this example.

![](/images/csdirector-cstruss/images/d-simplifiedbatching4-1218x703.png)

1. For **Process Unit** > **Cutting Output Consolidation By**, select **Group** so the saw file will consolidate pieces across project even if the pieces do not have the same name.


![](/images/csdirector-cstruss/images/d-processunit4.png)

1. For **Piece Labeling and Sequencing**, select the following:


- For **Piece Label Prefix**, select **Custom Prefix per Piece Type**.
- Use standard labeling, except for **Top Chord**, use **R**.


![](/images/csdirector-cstruss/images/d-piecelabelprefix4.png)

1. For the **Piece Sequencing**, select the following:


- Select **Restart Sequence At** > **Cutting Output Consolidation**, so the numbering restarts at 1 for each new group.
- Select **Restart per Piece Type**, so that each piece number starts with number 1.
- Select **Chord Labeling Sequence** > **Left to Right Position on Truss**, so the piece on the left side starts with the lowest number and higher number as you go left.
- Select **Web Labeling Sequence** > **Left to Right Position on Truss**, so the piece on the left side starts with the lowest number and higher number as you go left.


![](/images/csdirector-cstruss/images/d-piecesequencereset4.png)

1. Select **Piece Label Consolidation** > Consolidate by Truss, so only pieces in the same truss will have identical labels.


![](/images/csdirector-cstruss/images/d-piecelabelconsolidation4.png)

1. Click **Close**.
2. After Presets are configured, select **Tools** > **Batch Process** and click **Process**.


![](/images/csdirector-cstruss/images/d-batchprocessingexample2.png)

1. This is an example of a Truss Assembly report with Consolidation of Saw File per Group, Consolidation of Piece Label per Truss with Number Restart per Group R1, B1, W1.


![](/images/csdirector-cstruss/images/d-assemblyreportexample4.png)

**Related Topics**

- [Batching: Consolidation, Piece Labeling & Sequencing](/csdirector-cstruss/help-center/director-online-help/batching/d-batching-piecelabelsequence)
- [Batching Example - No Label Consolidation, Saw Files Consolidate at the Project Level](/csdirector-cstruss/help-center/director-online-help/batching/d-batchingexample1-nolabelconsolidationsawfilesconsolidateatproject)
- [Batching Example - Consolidation of Labels and Saw Files Across the Project](/csdirector-cstruss/help-center/director-online-help/batching/d-batchingexample2-consolidatelabelssawfilesacrossproject)
- [Batching Example - No Label Consolidation, Saw Files Consolidate Per Truss](/csdirector-cstruss/help-center/director-online-help/batching/d-batchingexample3-nolabelconsolidationlabelssawfilesconsolidatepertruss)