# Batching Example - Consolidation of Truss File per Group, Consolidation of Truss Label per Truss with Number Restart per Group R1, B1, W1

**Summary**

How to set up the following Batch Example: Consolidation of Truss File per Group, Consolidation of Truss Label per Truss with Number Restart per Group R1, B1, W1.

**Steps**

Consolidation of Truss File per Group, Consolidation of Truss label per Truss with Number Restart per Group R1, B1, W1

1. In the main **Project List** window, select **Presets**.
2. Select **Piece Labeling and Sequencing**, and information displays to the right.


The **Preset Manager** > **Fabrication** > **Piece Labeling and Sequencing** window below displays the selections used to produce this example.

![](/images/csdirector-cstruss/images/d-simplifiedbatching4-1136x755.png)

1. For **Process Unit** > **Cutting Output Consolidation By**, select **Group** so the saw file will consolidate pieces across project even if the pieces do not have the same name.


![](/images/csdirector-cstruss/images/d-processunit4.png)

1. For **Piece Labeling and Sequencing**, select the following:


- For **Piece Label Prefix**, select **Custom Prefix per Piece Type**.
- Use standard labeling, except for **Top Chord**, use **R**.


![](/images/csdirector-cstruss/images/d-piecelabelprefix4.png)

1. For the **Piece Sequencing**, select the following:


- Select **Restart Sequence At** > **Cutting Output Consolidation**, so the numbering restarts at 1 for each new group.
- Select **Restart per Piece Type**, so that each piece number starts with number 1.
- Select **Chord Labeling Sequence** > **Left to Right Position on Truss**, so the piece on the left side starts with the lowest number and higher number as you go left.
- Select **Web Labeling Sequence** > **Left to Right Position on Truss**, so the piece on the left side starts with the lowest number and higher number as you go left.


![](/images/csdirector-cstruss/images/d-piecesequencereset4.png)

1. Select **Piece Label Consolidation** > Consolidate by Truss, so only pieces in the same truss will have identical labels.


![](/images/csdirector-cstruss/images/d-piecelabelconsolidation4.png)

See the truss below.

![](/images/csdirector-cstruss/images/d-batching-trusslabel4-765x718.png)

See Batch Cut List below.

![](/images/csdirector-cstruss/images/d-batching-cutlist4.png)

**Related Topics**

- [Batching: Consolidation, Piece Labeling & Sequencing](/csdirector-cstruss/help-center/director-online-help/batching/d-batching-piecelabelsequence)
- Batching Example - No Truss Consolidation, Saw Consolidates at Project
- Batching Example - No Consolidation of Labels and Saw Files