# Preset Manager Field Descriptions ![](/images/csdirector-cstruss/images/icons/d-settingspresets.png)

**Summary**

Open the Preset Manager > Presets window to create templates for Fabrication and other parts of the application including Pricing, Engineering, Lumber, and Reporting. The initial template that displays is determined by the starting template set up in Administration > Starting Template.

**Window**

Preset Manager

![](/images/csdirector-cstruss/resources/images/d-presetmanager-2024r5-1043x563.png)

**Field Descriptions**

The following table lists field descriptions.

| Section/Field | Description |
|  --- | --- |
| File
 | Select :
- Save As Template: Save the current presets and settings as a new, user-named template.
- Delete Current Template: Delete an existing template.
- Rename Template: Rename an existing template.

 |
| Template
 | Select a template from the drop down list.
The Default Template always displays in the Template drop down list, along with any other available templates.
![](/images/csdirector-cstruss/resources/images/d-templatedropdown.png)
 |
| **Fabrication** |  |
| Piece Labeling and Sequencing
 | Use the Piece Labeling and Sequencing option to consolidate boards by group and label them individually. You can:
- Angle Batch to consolidate the CS Assembly list-Consolidated Angles report by angle, where pieces that have the same material and cut angles are consolidated. Do not check this box for other reports. Once this option is turned on for a project, it stays on unless it is unchecked.
- Label trusses individually, but have the boards combined to a group saw output
- Specify the sequence
- Select from a variety of labels or enter a custom label
- Select a label sequence
- View an example of the label in the dialog box
- Specify the label (batch or individual) that is viewed in the saw output

Process Unit section
Cutting Output Consolidation By options:
- Project: Consolidate pieces across projects even if they do not have the same name. See [Project Level Batching (No Label Consolidation)](/csdirector-cstruss/help-center/director-online-help/batching/d-batchingexample1-nolabelconsolidationsawfilesconsolidateatproject)and [Project Level Batching (Consolidate Labels & Saw Files Across Project)](/csdirector-cstruss/help-center/director-online-help/batching/d-batchingexample2-consolidatelabelssawfilesacrossproject)examples.  ![](/images/csdirector-cstruss/resources/images/d-simplifiedbatching-1254x749.png)
- Production Group: Only consolidates in each Group
- Truss: Only consolidates in each Truss
- Same Piece: Only consolidates the exact piece type and placement in truss
- Stack List by Plan/Elevation: Output based on how trusses appear in the Plans/Elevations Tab
- Batch by Stack List by Lot: Output based on how trusses appear in the Plans/Elevations & Deliveries; must have Lot in the plan
- By Piece Type: When you select this option, the following window displays, allowing you to consolidate chords and webs differently.  ![](/images/csdirector-cstruss/resources/images/d-presets-piecelabelingbypiecetype-1204x649.png)
- Truss by Truss: Used in a truss-by-truss cutting environment for "Just In Time" cutting. This may be useful for production shops that process truss components on a truss-by-truss basis. Previously, presets only allowed for trussID by trussID. See [Truss By Truss Consolidation.](/csdirector-cstruss/help-center/director-online-help/batching/truss-by-truss-consolidation-example)  ![](/images/csdirector-cstruss/resources/images/b-trussbytruss-option-996x257.png)

**Table Output Consolidation By** options:
- Stack List by Plan Elevation: Uses Plan/Elevation tab order and Plan/Elevation quantities:
  - Allows table output to be different than saw output
  - Trusses display in table files and reports in Plan/Elevation stacking order with the appropriate quantity for each stacking list instance per lot.
- Stack List by Lot: Groups by Lot using Plan/Elevation tab order and Lot reference quantities.
  - Allows table output to be different than saw output
  - Trusses display in table files and reports in Plan/Elevation stacking order with the appropriate quantity for each stacking list instance per Lot.
- Match Cutting Output Consolidation: Default value is applied when cutting and table output match.
- Truss By Truss: Consolidates truss by truss.

![](/images/csdirector-cstruss/resources/images/d-tableoutputconsolidationby-1247x242.png)
Best practices for Output Consolidation
1. Match the labeling option to the consolidation.
2. Use sorting that matches the consolidation option.

- This may require creating different saws for different Piece Types.

Note that Stack List does not work with Project and Group sort since the stack list orders trusses in the plans/elevation and Project and Group work differently.
For details on additional fields including Piece Label Prefix and the Piece Sequencing section, see[Batching: Consolidation, Piece Labeling & Sequencing](/csdirector-cstruss/help-center/director-online-help/batching/d-batching-piecelabelsequence)
 |
| **CS Director** |  |
| General | - Design Application - CS Truss Studio Suite is the only option available.
- Project Source - Select the most common source for projects submitted to Engineering. Options include Simpson Customer, Simpson Design Services, and Simpson Branch.
- For Single Plan projects to use Lot Level Tracking (to generate multiple lots), the setting **Display the Deliveries tab in Single Plan Projects** must be selected.

 |
| Pricing
 | Select Labor Methods (Standard or Custom), Project Pricing parameters, and Invoice Summary Reports. Beginning in 2024.7, you can generate Invoice reports based on presets defined in Pricing. Reports are accessible on the Invoice Form dialog![](/images/csdirector-cstruss/resources/images/d-presetspricing-938x503.png)e.
Invoice reports defined here are selectable on the Invoice dialog.
Tax Delivery option lets you select whether a delivery should be taxed. When inside a project, the Tax Delivery option is displayed on the Pricing tab. After a project is created, this option can be changed after the project is created. To view this option on the Pricing Tab, see [Pricing Tab commands](/csdirector-cstruss/help-center/director-online-help/project-list-section/d-pricingtab)
Plan/Elevation Pricing - starting values that will be applied to newly created projects unless another value is entered for the project's selected customer in Admin > Companies page > Company Information dialog > Accounting Information.
 |
| Engineering
 | Select state seal for the project location. You can also select related reports to generate (2024.7).
![](/images/csdirector-cstruss/resources/images/d-presetseal.png)
 |
| Lumber | ![](/images/csdirector-cstruss/images/d-presetslumberlength.png) |
| Reporting
 | The default for these options is unselected.
![](/images/csdirector-cstruss/images/d-presetspieceimages-595x416.png)
- PAH (Pivot Access Horizontal) dimension - a dimension needed for setting up saws for boards with 2 and 3 cut ends. This dimension displays on the Assembly Report.
- Cumulative Vertical dimensions
- Plumb Cut dimension - a vertical cut made on a rafter at the top ridge, where it meets the ridge plate.
- Top Chord Heel to Peak dimension - measured from the peak of a truss to the intersection of the heel and top chord bottom edge.
Click to display an example.
![](/images/csdirector-cstruss/transparent.gif)![](/images/csdirector-cstruss/images/d-presetstopchordheeltopeak-779x238.png)
- CS Plot Reports - allows you to toggle the display on CS Plot Reports to show either Plate Offsets or Truss Reactions. The default is Plate Offsets.

 |
| Plans and Elevations
 | Preset the starting quantity for each new elevation and establish the starting elevation name.
Check Allow Stack List Item Copy to copy a stack list and paste it in another elevation. When items are copied /pasted into another elevation the trusses will be set to User Managed, even if they are associated with the original layout.
![](/images/csdirector-cstruss/images/d-presetselevation.png)
 |
| Unavailable Materials | ![](/images/csdirector-cstruss/images/d-presetsunavailablematerials-981x151.png) |
| Project Error Checks
 | ![](/images/csdirector-cstruss/resources/images/d-presetsprojecterrorchecks.jpg)
Project Error Checks are run when Batch Process is initiated.
 |
| Auto Group
 | Auto Group presets lets you import groups as specified and sorts the groups.
For details about each sort group, see [Auto-Group](/csdirector-cstruss/help-center/director-online-help/project-list-section/d-autogroup)
![](/images/csdirector-cstruss/images/d-presetsautoimport-951x179.png)
 |
| Pull List
 | Pull list lets you automatically combine members of the same size to be cut from a single longer length board for the purpose of managing inventory costs.
![](/images/csdirector-cstruss/resources/images/d-pulllist-281x483.png)
 |
| Plate Sorting
 | Lets you determine how plates are sorted for analysis in Truss Studio.
![](/images/csdirector-cstruss/resources/images/d-platesorting.png)
 |
| **Fabrication** |  |
| Piece Labeling and Sequencing |  |
| CS Truss Studio
 | Opens a Truss Studio window where you can access the EnvData settings.
![](/images/csdirector-cstruss/resources/images/d-presetstrussstudioenvdata-1185x561.png)
 |
| Save and Close
 | Save the current preset setup for the selected template. To save as another template, use the File menu options.
![](/images/csdirector-cstruss/resources/images/d-presetmanager.png)
 |
| Save | Save the current preset change and leave the window open. |
| Cancel | Closes the preset window. |


**Accessing**

1. In the main **Project List** window, select **Tools**.
2. Select **Presets**.


![](/images/csdirector-cstruss/images/d-presetssquare.png)

The Preset Manager window displays.

1. Select a category in the left pane to display applicable information in the right pane. Options are described in the table above.