# Project Warnings: Actual Size Mismatch Tab Field Descriptions

**Summary**

The Project Warnings dialog > Actual Size Mismatch tab displays all trusses with an actual size mismatch.

**Window**

Project Warnings >Actual Size Mismatch

![](/images/csdirector-cstruss/images/d-lumbersize6.png)

**Field Descriptions**

The following table lists field descriptions.

| Column /
Button /
Checkbox | Description |
|  --- | --- |
| Reanalyze? | Checkbox that is referenced when the Rebuild / Reanalyze Selected Components with Project's EnvData > Actual Size Settings button is clicked. |
| Size | Nominal size of lumber with the actual size mismatch. |
| Size Type
 | Truss Studio allows users to define the Actual Size for three Size Types; Top Chords, Bottom Chords and Webs.
Actual Size Mismatches will only display for one Size Type per row on the grid.
This means that it is possible for a single truss to have more than one Actual Size Mismatch listed at a time (if there are mismatches for more than one Size Type). When a truss is reanalyzed from the Actual Size Mismatch tab, only the selected Size Type(s) is replaced.
 |
| Actual Width | Actual Width of the lumber used in the truss design. |
| Project Width | Actual Width of the lumber in the project's EnvData. (For reference only.) |
| Components | List of components that have the lumber that does not match the LumberSize in the project's EnvData. |
| Rebuild / Reanalyze Selected Components with Project's EnvData Settings | Calls Truss Studio to rebuild and reanalyze the selected components with the project's EnvData > Lumber Size settings. |
| Hold Plates
 | Indicates if analysis should hold plates.
The Hold Plates checkbox state is retained per user so that the last setting used is applied when the dialog is opened again.
 |


**Accessing**

1. In the main **Project List** window, select **Tools**.
2. Select **Project Warnings**.
3. In the **Project Warnings** window, select **Actual Size Mismatch**.


**Related Topics**

- [Lumber Size Setting Mismatch](/csdirector-cstruss/help-center/director-online-help/project-list-section/d-lumbersizesettingmismatch)
- [Set Lumber Size in Preset Template](/csdirector-cstruss/help-center/director-online-help/presets/d-setlumbersizepresettemplate)