# Match Bottom Chord of Gable End Truss to Adjacent Truss Profile

**Description**

The bottom chord of the gable end truss should match the adjacent truss profile to allow the ceiling diaphragm to provide bracing support for the top plate of the gable end wall.

**Design Practices**

Model building codes require that wall studs be continuous between points of lateral support. For example, a ceiling diaphragm attached to the bottom chord of a scissor truss is a lateral support. If the gable end truss bottom chord profile does not match the scissor truss profile, the wall studs will not be continuous between lateral support.

![](/images/csdirector-cstruss/resources/images/ts-gableendframesslope-bcs.jpg)

**Required Actions**

The bottom chord profile of gable trusses should match the bottom chord profile of the truss next to it in order for the bottom chord bracing and gable end wall framing to comply with the model building codes. Using a scissor truss next to a flat bottom chord gable truss without the approval of the Building Designer or Building Official could cause project delays, costly framing revisions, or new trusses to be added after the trusses are installed. It is advisable to confirm that this condition is acceptable with the Building Designer and Building Official prior to submitting the designs for seals. Jobs with this condition will be verified with the customer that the condition is intentional and acceptable by the Building Designer. A notation will also be returned with the job indicating the following:

**Caution: As per SBCA BCSI-B3, using a flat bottom chord gable end truss with adjacent trusses that have sloped bottom chords is prohibited by some building codes as adequate bracing of this condition is difficult and sometimes impossible. Special end wall bracing design considerations are required by the building designer if the gable end frame profile does not match the adjacent trusses.**

![](/images/csdirector-cstruss/resources/images/ts-noteflatbcgable-1382x337.png)

**Related Topics**

Permanent Restraint/Bracing of Chords & Web Members