# Manually Create a Connection

**Purpose**

Manually add a connection to a layout

**Prerequisites**

A layout

**Steps**

To create a connection on a layout:

1. From the **Truss Operations** menu select **Create Connection** or click ![](/images/csdirector-cstruss/resources/images/ts-createconnection.png).


The following prompt displays: ![](/images/csdirector-cstruss/resources/images/ts-connectorselectionfirstprompt.png)

1. Select the carried truss.


The following prompt displays: ![](/images/csdirector-cstruss/resources/images/ts-connectorselectionprompt.png)

1. Select a girder or bearing wall..


A connectivity indicator displays at the center line where the first and second truss or wall intersect.

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png)Note that connections do not need to be in contact or be on the same layer to be created, and for load transfer to occur.

There is a programmed tolerance of 6” from the end of the member to the center of the carrying member/wall.

Note that you cannot specify a hanger at a mid-span bearing. Hangers may only be specified at the ends of a truss.

3D hangers display on the layout. Generic 3D hangers display if there is not a supporting .stl file.

i think something should be added to say, select the carried truss 1st; select the girder or bearing wall 2nd.

**Related Topics**

[Connector Selection Overview](/csdirector-cstruss/help-center/layout-view/connector-selection-overview/connector-selection-overview)

[Enable/Disable Connections](/csdirector-cstruss/help-center/layout-view/connector-selection-overview/enable-disable-connections)

[Display Control settings](/csdirector-cstruss/help-center/truss-studio-online-help/env-data-settings/display-control-settings) (to define color palette for loads and hangers)

[Select a Connector Not in Inventory](/csdirector-cstruss/help-center/layout-view/connector-selection-overview/select-connection-not-in-inventory)

[Select Multi-truss Connectors](/csdirector-cstruss/help-center/layout-view/connector-selection-overview/select-multi-truss-connector)

[Enable/Disable Connections](/csdirector-cstruss/help-center/layout-view/connector-selection-overview/enable-disable-connections)