# Select Multi-truss Connectors

**Purpose**

To select connectors in layout for truss-to-truss connections where a girder truss carries two or more child trusses at a single connection

**Prerequisites**

A layout with multiple child trusses carried by a single connection

**Steps**

1. On the **Truss Operations** menu, select **Manual Connector Selection** or click ![](/images/csdirector-cstruss/resources/images/ts-manualconnectorselection.png)on the Truss Operations toolbar.


The following prompt displays in the caption bar:

Select a connectivity indicator to create a connector. Esc or right-click to exit command.

1. Select a connectivity indicator (all connectivity indicators are selectable, regardless of color).


The selected connection is highlighted, as are any other connections with the same girder and child trusses. The **Connection Details** window displays.

![](/images/csdirector-cstruss/resources/images/connection-details-306x167.jpg)  The color of the indicator may vary, depending on the status of the connection.

1. Select **Multi Truss Connector** and click **Add Connectors**.


There are several options that may display, depending on the analysis state of the trusses:

- If the trusses that make up the connection have not been analyzed (all trusses involved in the multi truss connection) the Analyze Trusses window displays. Click **Yes** to complete the analysis. If you select **No**, the connection indicators are deselected.


![](/images/csdirector-cstruss/resources/images/analyzefirst-275x144.png)

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png)**Note:** The analysis honors the Transfer Loads Automatically setting (under Layout Settings > Load Transfer). If Transfer Loads Automatically is enabled, selected load transfer point loads will be created on analysis. If this option is not enabled, the analysis will run without transferring loads. If load transfer point loads were previously transferred, the following window is displayed.

![](/images/csdirector-cstruss/resources/images/load-transfer-dialog-397x149-294x110.png)

- If the trusses have been analyzed and are failing analysis, the Failing Analysis window displays.


![](/images/csdirector-cstruss/resources/images/notpassinganalysisdialog-323x122-297x112.png)

- If both the child and girder trusses have been previously analyzed and have passed analysis, Truss Studio generates a list of possible solutions. That list is filtered down to a list of solutions with only those connectors contained in the project inventory. This list is displayed on the My Inventory tab. If no solutions are available and contained in inventory, **No Solutions** is displayed. In 2025.5. a Connection Info tab was added.


![](/images/csdirector-cstruss/resources/images/my-inventory-431x258.png)  javascript:void(0);  ![](/images/csdirector-cstruss/transparent.gif)More information about the Connector Selection window:

The list can be further filtered by selecting one of the options in the Style drop down list.    ![](/images/csdirector-cstruss/resources/images/my-inventory-solutions-with-style-dropdown-420x254-473x286.jpg)    The Connections section reflects the selections made in the Connection Details window in step 1. The Connections section is not editable and is shown here only for informational purposes. Load, Uplift, and Plies are populated with the reaction information from the child truss.  The Show Catalog Page and Add to Elevation buttons are disabled until one of the items on the list is selected. Once a connector is selected on the list and the Show Catalog Page button is selected, a PDF of the catalog page with the selected connector displays.  If this window is re-opened after a hanger has been specified, it will open to the tab where the connector was selected and the previously selected connector will be highlighted.  If you select a connector that is not in your inventory, a message displays in red indicating that the connector might be a special order item. The **Connection Info** tab displays the design parameters used in hanger selection, ensuring clarity and confidence in your hanger designs by making connector data more transparent. This text is informational only and cannot be edited, except by modifying the components that are being connected.   ![](/images/csdirector-cstruss/resources/images/ts-connectioninfotab-877x534.png)    4. Select a connector from the drop down list. The selected connector is highlighted on the list and the **Show Catalog Page** and **Add to Elevation** buttons are enabled. 5. Click **Add to Elevation**. The dialog is closed and the selected connector is saved to **Miscellaneous items** in Director; it is also saved to the **Elevation** with the quantity of the number of connections that were highlighted in step 1 (the quantity of identical trusses that are being carried by the girder).  The hanger symbol is displayed on the layout. A hanger schedule is created if this is the first connector selected on the layout. If other connectors were previously selected and the schedule was already created, the newly selected hanger is added to the connector schedule.  As the number of connector solutions increases, labels may change. The connector schedule lists solutions alphabetically by model. Circles are used to show Top location connections and Squares are used to indicate Bottom location connections.  ![](/images/csdirector-cstruss/resources/images/ts-multitrussconnections-555x267.png)

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) **Note:** 3D hangers display on layout. Generic 3D hangers display on layout if there is not a supporting .stl file

![](/images/csdirector-cstruss/resources/images/ts-3dhanger-example1-538x372.png)

**Related Topics**

- [Layout Connector Selection](/csdirector-cstruss/help-center/layout-view/connector-selection-overview/select-connectors-layout)
- [Specify a Hanger not in Inventory](/csdirector-cstruss/help-center/layout-view/connector-selection-overview/select-connection-not-in-inventory)
- [Display Control settings](/csdirector-cstruss/help-center/truss-studio-online-help/env-data-settings/display-control-settings) (to define color palette for loads and hangers)