# Copy and Mirror Objects

**Purpose**

Layouts are often mirrored so that the layout correctly reflects the way the house is oriented on the lot. One example is a lot that requires the garage on the left hand side while another lot with the same plan (layout) requires the garage to be on the right. Multi-family projects may also use mirroring. Many of these projects have the same units repeated throughout the building. A mirror command gives the ability to create one unit and then mirror it.

**Prerequisites**

An existing layout with objects to copy and mirror

**Steps**

1. Select an object to copy and mirror. To select multiple objects, use **Ctrl+Shift** and drag to select the objects.
2. From the **General** menu, select **Mirror Selected**, click ![](/images/csdirector-cstruss/resources/images/mirror-selected-button.png), or right-click to select.


![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png)**Note**: Mirror All and Copy All work the same as Mirror Selected and Copy Selected except that all objects in the layout are selected.

The following prompt displays:   ![](/images/csdirector-cstruss/resources/images/ts-mirrorprompt1st.png)

1. Create a reference line by selecting a wall edge, truss edge, work line, or plane edge; or use one of the reference line commands.


The reference line displays as a dashed green line. The **Enter Offset Distance** window displays.  ![](/images/csdirector-cstruss/resources/images/enter-offset-distance-dialog-203x105.png)

1. Enter the desired offset amount and click **OK**. Leaving the distance as zero is also acceptable.


The reference line displays at a location based on the offset distance entered.

The following prompt displays: ![](/images/csdirector-cstruss/resources/images/ts-mirrorprompt2nd.png)

1. Click on either side of the line.


The **Mirror** window displays.

![](/images/csdirector-cstruss/resources/images/copy-and-mirror-dialog-244x151.png)

1. Select **Copy and Mirror** and click **OK**.


The objects selected in step 1 are displayed mirrored about the reference line. The original objects and the reference line are no longer displayed. The layout is displayed as 'best fit' in the model space; this means that the new extents are based on the mirrored layout and the original layout does not impact the viewing area.

If you click **Cancel**, the command is exited but the objects remain selected. The reference line no longer displays.

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png)**Notes**

- The **Mirror Selected** menu item and toolbar button are only available if an object is selected. If nothing is selected on the layout they are disabled and are grayed out.
- All of the selected text and labels are also mirrored when using this command.
- All of the trusses on the copied and mirrored layout retain the same label as the original layout. It does not matter if they are system generated or user-defined labels; they remain the same.
- Selected objects may be on different layers as long as they are visible to be selected. When they are mirrored they remain on the layers they were on originally.
- Copying and mirroring a layout does not impact the lock status of the trusses. They remain in the same state as before they were copied.


![](/images/csdirector-cstruss/resources/images/copy-and-mirror-650x478.png)

**Related Topics**

[Mirror Objects](/csdirector-cstruss/help-center/truss-studio-online-help/profile-command-input/mirror-command)