# Use Quick Dimensions

**Purpose**

Quickly add

manual dimensions

**Prerequisites**

An existing layout

**Steps**

1. Select **Quick Dimension** from the **Dimension** menu or click ![](/images/csdirector-cstruss/resources/images/ts-quickdimsicon.png).


The following prompt displays:

![](/images/csdirector-cstruss/resources/images/ts-quickdimprompt1.png)

1. Select the first point or two lines that intersect at a point.


A dashed red line is anchored at the first point and extends as the cursor is moved to the second point.

![](/images/csdirector-cstruss/resources/images/ts-quickdim-twopoints-656x218.png)

The following prompt displays:

![](/images/csdirector-cstruss/resources/images/ts-quickdimprompt2.png)

1. Select the second point or two lines that intersect at a point.


The following prompt displays:

![](/images/csdirector-cstruss/resources/images/ts-quickdimprompt3.png)

1. Position the cursor at the location where you want the dimension to display and select the point. The dimension with the dashed line moves with the cursor.


The dimension is added at that location. The dimension line is displayed solid black and has tick marks at each end. At this point, the dimension becomes permanent and can be moved using the Move command.

Snap points are available so that additional dimensions can be aligned.

![](/images/csdirector-cstruss/resources/images/ts-quickdim-addeddim-540x186.png)

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png)**Note:** Select the first point and hold Shift to limit selection to either horizontal or vertical dimensions. If **Shift** is not selected, the dimension is the 'Along' dimension. If **Shift** is selected (and held down), the dimension is either a horizontal or vertical dimension, depending on where the cursor is moved.

1. To exit the command, press **Esc**, right-click, or press **Cancel**.


![](/images/csdirector-cstruss/transparent.gif)See examples

**Along Dimension example - Shift key is not selected**

![](/images/csdirector-cstruss/resources/images/ts-quickdim-alongdimension-641x305.png)

Horizontal Dimension - Shift key is selected and cursor is moved vertically

![](/images/csdirector-cstruss/resources/images/ts-quickdim-horizontaldimension-623x276.png)

Vertical Dimension - Shift key is selected and cursor is moved horizontally

![](/images/csdirector-cstruss/resources/images/ts-quickdim-verticaldimension-634x256.png)

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png)**Note**: Quick dimensions use the properties described in [Create Labels.](/csdirector-cstruss/help-center/design-view/add-notes-labels)Dimension size and font are defined in the EnvData [Font Settings.](/csdirector-cstruss/help-center/design-view/dimension-labels-and-annotations/define-fonts)

**Related Topics**

[Define Dimension Format Settings](/csdirector-cstruss/help-center/layout-view/define-dimension-format-settings)

[Create Spacing Dimensions](/csdirector-cstruss/help-center/truss-studio-online-help/use-dimensions/create-spacing-dimensions)