# Split Walls

**Purpose**

To split a wall into two separate walls in order to move wall segments and adjust wall heights on a portion of the original longer length wall. This functionality is used on most jobs.

**Prerequisites**

If you are creating a wall and want to use settings other than the defaults, you must edit the Wall Settings. See [Wall Settings](/csdirector-cstruss/help-center/layout-view/edit-walls/edit-wall-settings) for more information.

**Steps**

To split a wall:

1. Open the truss and select one or more walls. The end of the wall selected is the end from which the offset dimension will be measured.


![](/images/csdirector-cstruss/resources/images/select-wall-to-split-316x510.png)

1. On the General menu select Split.


![](/images/csdirector-cstruss/resources/images/split-menu.png)    The Enter Offset Distance dialog is displayed.    ![](/images/csdirector-cstruss/resources/images/enter-offset-distance-dialog.png)    3. Enter the desired offset and click OK.   The wall is split at the offset distance input. The end of the wall that was selected in Step 1 is the end from which the offset distance is measured.    ![](/images/csdirector-cstruss/resources/images/split-wall-end-product-278x400.jpg)

Wall split locations coming from the corner or exterior wall

The following illustrations show how the Split command operates on corner and exterior walls.

*Corner*

![](/images/csdirector-cstruss/resources/images/split-dimension-from-the-corner-505x308.jpg)

**Interior Wall**

![](/images/csdirector-cstruss/resources/images/split-dimension-for-interior-wall-480x380.jpg)

**Notes**

- If a wall has a roof and/or ceiling plane attached and the plane is cut (solved), the longer of the two walls will have the cut roof and ceiling plane attached to it; the application will attempt to re-cut the planes but he shorter wall will not have a new plane attached.
- If the split walls are equal length the existing plane will be attached to the left/lower wall. The split wall will remain the same height and width as the longer 'parent' wall. You can change the height, width, plane and overhangs in the wall Properties window.


**Related Topics**

- Edit Walls