# Import Project Information from Director to Layout

**Purpose**

Import information from CS Director, for use in layouts and RGL reports. You can also add additional lines to include more information. Your RGL file must be customized in order to use the imported data. Contact Simpson Strong-Tie Support for assistance.

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon.png) Watch video

Follow these steps to import information from Director into the current layout:

1. Click the **Info** button while in a layout.


![](/images/csdirector-cstruss/resources/images/ts-info-button-914x74.jpg)

The **Info Block** dialog displays. Greyed out fields are imported from Director and are not editable in Truss Studio.

![](/images/csdirector-cstruss/resources/images/ts-infoblockdialog.png)

1. Click the **...** button next to a field to map that information.


The **Data Mapping** dialog displays.

![](/images/csdirector-cstruss/resources/images/ts-datamappingexample-811x380.png)

1. Search for a field to add by typing all or part of the field name in the **Search** box.
2. Click **OK** to import the field information from Director into layout.


In the example below, **Job Site - Name** was added and the information from that field in Director was imported into the Info Block.

![](/images/csdirector-cstruss/resources/images/ts-infoblockex-2-callouts.png)

You can add additional information by clicking the ... button next to one of the Extra # fields. In the example below, Job Site address has been imported from Director into the Info Block.

![](/images/csdirector-cstruss/resources/images/ts-infoblockinfo-director.png)

![](/images/csdirector-cstruss/resources/images/ts-infoblockex-3.png)

1. Continue importing information from Director, as needed. Additional important information to import may include square footage, loading calculations, and custom fields.


- To continue adding information, click the **...** button next to any blank **Extra** field.
- To add more **Extra** lines, click the **Add** button. You can add up to a total of 50 lines.


1. Click **OK** to save your information.
2. Click **Output**  ![](/images/csdirector-cstruss/resources/images/ts-outputlayouticon.png) to open an RGL file and use your mapped data in the file.


![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) **Notes:**

- You must have your RGL file customized in order to include this additional information. Contact Simpson Strong-Tie support if you require assistance.
- You have the ability to map TCSL (top chord snow load) and Building Category for Canadian projects.


#### Save Info Block Info to Reuse in Layouts

To save Info Block information to reuse in all layouts, you must save the information to your Env Data file.

Follow these steps:

1. From the **Environment** menu, select **Env Data** <filename>.
2. Click the **Info Block Template** button.


![](/images/csdirector-cstruss/resources/images/ts-infoblocktemplate.png)

The **Info Block** dialog displays.

![](/images/csdirector-cstruss/resources/images/ts-infoblocktemplate-dialog.png)

1. Using the procedure outlined above, select the information you want to import from Director.
2. Save the information to your Env Data file so that it can be reused in other layouts.


**Related Topics**