# Input Floor Trusses

**Purpose**

Input basic floor trusses

**Prerequisites**

A basic layout

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon-43x44-34x34.png) Watch video

1. In Layout view, select the Floor template from the drop down list at the top of the window.


![](/images/csdirector-cstruss/resources/images/ts-floorinputtemplate-566x41.png)

A basic, sample layout is shown below.

![](/images/csdirector-cstruss/resources/images/ts-floorload-basiclayout-409x306.png)

1. Click **Load Template Manager** and make any loading changes. Click **OK**.


![](/images/csdirector-cstruss/resources/images/ts-loadtemplatmanagedialog-508x316.png)

1. Click **Settings** to edit the truss settings. For this example, select 03-03 for **One Ply Thick** setting and click **OK**.


![](/images/csdirector-cstruss/resources/images/ts-inputfloors-settings-432x418.png)

1. Select **Next Truss** from the **Truss Placement** menu or click ![](/images/csdirector-cstruss/resources/images/ts-nexttrussicon.png) to display the Next Truss dialog.


![](/images/csdirector-cstruss/resources/images/ts-nexttrussdialog-275x318.png)

1. For this example, change the **Flat-Truss Depth** to 1-04-00 and make sure the **Auto** option is selected under **Trim Options**. Click **OK**.


![](/images/csdirector-cstruss/resources/images/ts-nexttruss-flattrussdepth-287x331.png)

1. Select a reference line on the layout to position trusses.
2. Enter an **Offset Distance** and click **OK**.
3. Select a stop point for truss placement.


![](/images/csdirector-cstruss/resources/images/ts-floorinput-stoptrussplacement-440x337.png)

1. Click **Next Truss** ![](/images/csdirector-cstruss/resources/images/ts-nexttrussicon.png) and select the **Set End Lines** option. Click **OK**.


![](/images/csdirector-cstruss/resources/images/ts-nexttruss-endlines-297x343.png)

1. Select the left end of the bottom chord and the left end of the top chord.
2. Select the right end of the bottom chord.
3. Select a reference line to position trusses.


![](/images/csdirector-cstruss/resources/images/ts-floorinput-leftendrtend-487x325.png)

1. Accept the offset distance of 0000 and click **OK**.
2. Select a stop point for truss placement and select all trusses.


![](/images/csdirector-cstruss/resources/images/ts-inputfloors-selectalltrusses-406x285.png)

1. Click **End Desc Right** ![](/images/csdirector-cstruss/resources/images/ts-enddescright.png).


The **End Desc Right** dialog displays.

1. Select **Ribbon Post** and from the **Y Measure** drop down list, select 03-08.


![](/images/csdirector-cstruss/resources/images/ts-enddescrightdialog-372x326.png)

1. Click **Apply to Right.**
2. Rotate the model to see the floor truss in 3D view.


**Related Topics**

[Floor Truss Zones Overview](/csdirector-cstruss/help-center/design-view/create-a-floor-truss/floor-truss-zones)