# Input Roof Truss with Cantilevers

**Purpose**

Input basic roof trusses with cantilevers

**Prerequisites**

A layout

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon-43x44-37x37.png) Watch video

For this example, the following wall settings are used:

Width: 308

Cant: 2-00-00

OH: 0

Heel Height: Nom 2x4

Roof Plane: 4/12

Ceil Plane: 0

![](/images/csdirector-cstruss/resources/images/ts-roofinputcantilever-362x303.png)

The first truss is a 2-ply girder truss.

1. Click **Next Truss**.


The **Next Truss** dialog displays.

1. Select 2 plies and select **Is Girder Truss**.
2. Under **Trim Options**, click **Select End Lines**.
3. Under **Plane Options**, click **Specified Planes in Order L-R**.


![](/images/csdirector-cstruss/resources/images/ts-nexttruss-roofcantilevers-346x402.png)

1. Select the left end of the bottom chord and the left end of the top chord.
2. Select the right end of the bottom chord and the right end of the top chord.


See the example below.

![](/images/csdirector-cstruss/resources/images/ts-roofinputcanti-selectplanes-371x350.png)

1. For the top chord profile, select the planes in order, from left to right.
![](/images/csdirector-cstruss/resources/images/ts-rooftcprofile-334x309.png)
2. Right-click to accept the top chord profile.
3. Create a reference line to position trusses.


![](/images/csdirector-cstruss/resources/images/ts-roofinput-referenceline-376x349.png)

1. Accept the offset distance of 0000 and click **OK.**
2. Click to indicate the stop point for truss placement.


![](/images/csdirector-cstruss/resources/images/ts-roofinputsideplacement-357x308.png)

Continue to create additional parts of the roof truss.

1. Click **Next Truss**.


The **Next Truss** dialog displays.

1. Click **Reset**.
2. Under **Trim Options**, click **Auto-Find Wall / Trim Edges**.
3. Under **Plane Options**, click **Auto-Find Planes** and click **OK.**
4. Create a reference line to position trusses.
5. Click **OK** to accept the offset distance of 0000.
6. Click to indicate the stop point for truss placement.


The result is shown below.

![](/images/csdirector-cstruss/resources/images/ts-roofinput-truss2-426x350.png)

Continue to create additional parts of the roof truss.

1. Click **Next Truss**.


The Next Truss dialog displays.

1. Under **Trim Options**, click **Set End Options**.
2. Under **Plane Options**, click **Specified Planes in Order L-R** and click **OK.**
3. Select the left end of the bottom chord and the left end of the top chord.
4. Select the right end of the bottom chord and the right end of the top chord.


![](/images/csdirector-cstruss/resources/images/ts-roofinput-selecttcandbc-435x311.png)

1. For the top chord profile, click to select the planes in order, from left to right.


![](/images/csdirector-cstruss/resources/images/ts-roofinput-tcprofile-463x328.png)

1. Right click to accept the top chord and bottom chord profiles.


Continue to create additional parts of the roof truss.

1. Create a reference line to position trusses.
2. Click **OK** to accept the offset distance of 0000.
3. Select the stop point for truss placement.


![](/images/csdirector-cstruss/resources/images/ts-roofinputstoptruss-457x349.png)

![](/images/csdirector-cstruss/resources/images/ts-roofinputcompletedtruss-445x369.png)

1. Select **Hip Set** ![](/images/csdirector-cstruss/resources/images/ts-hipseticon.png) and verify the settings displayed in the **Hip Set** dialog.


![](/images/csdirector-cstruss/resources/images/ts-hipsetdialog-rooftrusses-434x425.png)

1. Click **OK**.
2. Select the front wall and then press **Escape** to exit the **Next Truss** command.


![](/images/csdirector-cstruss/resources/images/ts-roofinput-frontwall-536x454.png)

1. Select **Valley Set** ![](/images/csdirector-cstruss/resources/images/ts-valleyseticon.png) and verify the settings on the **Valley Set** dialog. Click **OK**.


![](/images/csdirector-cstruss/resources/images/ts-roofinputvalleyset-271x274.png)

1. Define a polygon area for the valley set and right click to accept.


See the example below.

![](/images/csdirector-cstruss/resources/images/ts-roofinput-cant-define-polygon-482x373.png)

1. Select the bottom chord profile and right click to accept.
2. Create a reference line to position trusses.
3. Enter and offset distance of 2 and click **OK**.
4. Click to select a side to offset.
5. Drag a line to indicate truss placement.


See the example below.

![](/images/csdirector-cstruss/resources/images/ts-roofinputtrusspath-503x359.png)

The roof truss is complete. You can view in 3D to see the entire roof with cantilevers.

**Related Topics**