# Input Roof Truss with Overhangs

**Purpose**

Input basic roof trusses with overhangs

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon-43x44-37x37.png) Watch video

For this example, the following wall settings are used:

Width: 308

Cant: 2-00-00

OH: 0

Heel Height: Nom 2x4

Roof Plane: 4/12

Ceil Plane: 0

![](/images/csdirector-cstruss/resources/images/ts-roofinputcantilever-362x303.png)

The first truss is a 2-ply girder truss.

1. Click **Next Truss**.


The **Next Truss** dialog displays.

1. Under **# Plys** select 2 plies and select **Is Girder Truss**.
2. Under **Trim Options**, click **Select End Lines**. Click **OK**.


![](/images/csdirector-cstruss/resources/images/ts-nexttruss-roofoh-323x375.png)

1. Select the left end of the bottom chord and the left end of the top chord.
2. Select the right end of the bottom chord and the right end of the top chord.


![](/images/csdirector-cstruss/resources/images/ts-roofinputoh-selectplanes-371x348.png)

1. Create a reference line to position trusses.
2. Click **OK** to accept the offset distance of 0000.
3. Click to indicate a stop point for truss placement.


![](/images/csdirector-cstruss/resources/images/ts-roofinput-ohtrussplacement-400x339.png)

1. Click **Next Truss** ![](/images/csdirector-cstruss/resources/images/ts-nexttrussicon.png).


The Next Truss dialog displays.

1. Click **Reset**.
2. Under **Trim Options**, click **Auto-Find Wall / Truss Edges**.
3. Under **Plane Options**, click **Auto-Find Planes** and click **OK.**


![](/images/csdirector-cstruss/resources/images/ts-nexttruss-autofindwallsplanes-322x372.png)

1. Select a reference line to position the truss**.**
2. Click **OK** to accept the offset distance of 0000.
3. Select a stop point for truss placement.


See the example below.

![](/images/csdirector-cstruss/resources/images/ts-roofinput-stopplacement-378x323.png)

1. Click **Next Truss** ![](/images/csdirector-cstruss/resources/images/ts-nexttrussicon.png).


The **Next Truss** dialog displays.

1. Under **Trim Options** select **Set End Lines**.
2. Under **Plane Options** select **Specified Planes in order L-R** and click **OK**.


![](/images/csdirector-cstruss/resources/images/ts-roofinputnexttruss-292x336.png)

1. Select the left end of the bottom chord and the left end of the top chord.
2. Select the right end of the bottom chord and the right end of the top chord.
3. For the top chord profile, select the left end plane and the right end pane.
4. Right click to accept the top chord profile.
5. Right click to accept the bottom chord profile.


See the example below.

![](/images/csdirector-cstruss/resources/images/ts-roofinputoh-truss2-480x360.png)

1. Create a reference line to position the next truss.
2. Click **OK** to accept the offset distance of 0000.
3. Select the stop point for truss placement.


![](/images/csdirector-cstruss/resources/images/ts-roofinputoh-completetruss2-449x373.png)

Continue to create additional parts of the roof truss.

1. Select **Hip Set** ![](/images/csdirector-cstruss/resources/images/ts-hipseticon.png).
2. Verify the settings on the **Hip Set Dialog** and click **OK**.


![](/images/csdirector-cstruss/resources/images/ts-hipsetdialog-rooftrusses-441x433.png)

1. Click to select the front wall for the hip set.
2. Press **Escape** to exit the **Next Truss** command.


See the example below.

![](/images/csdirector-cstruss/resources/images/ts-roofinputoh-createhipset-467x386.png)

1. Click **Valley Set** ![](/images/csdirector-cstruss/resources/images/ts-valleyseticon.png).
2. Verify the settings on the **Valley Set Dialog** and click **OK**.


![](/images/csdirector-cstruss/resources/images/ts-roofinputvalleyset-303x307.png)

1. Define a polygon area for the valley set.


See the example below.

![](/images/csdirector-cstruss/resources/images/ts-roofinput-completepolygon-614x455.png)

1. Select the bottom chord profile and right click to accept
2. Select a reference line.
3. Enter the offset distance of 2 and click **OK**.
4. Click to select the side to offset.
5. Drag a line to indicate a stop point for truss placement.


See the example below.

![](/images/csdirector-cstruss/resources/images/ts-roofinputoh-dragplacementline-534x405.png)

The roof truss is complete.

1. View in 3D to see the complete truss with overhangs.


**Related Topics**