# Create an angled wall using dimensions

**Purpose**

Create an angled wall by specifying X and Y dimensions

**Prerequisites**

A layout

If you are creating a wall and want to use settings other than the defaults, you must edit the Wall Settings. See [Wall Settings](/csdirector-cstruss/help-center/layout-view/edit-walls/edit-wall-settings) for more information.

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon-43x44.png) Watch video

To create an angled wall using X and Y dimensions:

1. Create a new layout or specify the origin for the angled wall.
2. Create an angled wall by simultaneously specifying a horizontal and vertical direction simultaneously (u, d, l, r or by using the arrow keys), followed by the length. The order in which you enter the X and Y dimension does not matter.


An example is shown below.

![](/images/csdirector-cstruss/resources/images/u10-create-wall-687x79.png)

When you press **Enter**, the wall is displayed with the specified length and direction.

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) Note that you can also use e, w, n, s (for east, west, north, south)

**Examples**

![](/images/csdirector-cstruss/resources/images/ts-angledwallexample1.png)

![](/images/csdirector-cstruss/resources/images/ts-angledwallexample2.png)

**Related Topics**

- [Create a single wall](/csdirector-cstruss/help-center/layout-view/input-walls/create-a-single-wall)
- [Create a series of walls](/csdirector-cstruss/help-center/layout-view/input-walls/create-a-series-of-walls)
- [Create a single wall from a specified starting point](/csdirector-cstruss/help-center/layout-view/input-walls/select-and-change-the-origin-on-a-wall)
- [Create an angled wall by specifying angle and length](/csdirector-cstruss/help-center/layout-view/input-walls/create-an-angled-wall-by-specifying-angle-and-length)
- [Create a wall with an arc](/csdirector-cstruss/help-center/layout-view/input-walls/create-a-wall-with-an-arc)
- [Create a column](/csdirector-cstruss/help-center/layout-view/input-walls/create-a-column)
- [Create a bay window](/csdirector-cstruss/help-center/layout-view/input-walls/create-a-bay-window)
- [Wall Settings](/csdirector-cstruss/help-center/layout-view/edit-walls/edit-wall-settings)
- [Wall Properties](/csdirector-cstruss/help-center/layout-view/wall-properties)
- [Walls and Planes Env Data Settings](/csdirector-cstruss/help-center/truss-studio-online-help/env-data-settings/walls-and-planes-settings)