# Wall Orientation

**Purpose**

To input walls in a clockwise or counterclockwise direction. This is convenient for plans with missing dimensions since you can enter walls in both directions, and then solve for the unknown dimensions.

**Prerequisites**

A layout

**Steps**

To input a wall:

1. From the **Walls** menus, select **Wall Commands** or click ![](/images/csdirector-cstruss/resources/images/ts-wallcommandsicon.png).


The **Wall Commands** window displays.

1. Select the orientation for wall input - Right or Left and click **OK**


![](/images/csdirector-cstruss/resources/images/ts-wallorientationdialog-549x251.png)

1. Enter a direction and distance in the **Layout Commands** box and press **Enter**.


The wall is created based on the layout command entered and is oriented based on the selection made in the **Wall Commands** window. Sample walls are shown below.

![](/images/csdirector-cstruss/resources/images/ts-wallorientationleft-403x226.png)

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) Note that the **Right** and **Left** orientation options are not available if **Work Line** is selected under **Mode of Input**.

**Related Topics**