# Specify Connectors with Connector Selector Mode

**Purpose**

Easily

specify multiple connector solutions for structural members.

**Prerequisites**

An existing layout with truss connectivity indicators

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) Note that connector indicator selection must be enabled for proper functionality

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon-44x45.png) Watch video

1. Create or open a layout.
2. From the **Truss Operations** menu select **Manual Connector Selector** or click ![](/images/csdirector-cstruss/resources/images/ts-manualconnectorselecticon.png).


The following prompt displays ![](/images/csdirector-cstruss/resources/images/ts-selectconnectindicator.png)

1. Select a connectivity indicator.


The **Connection Details** dialog displays.

![](/images/csdirector-cstruss/resources/images/ts-connectiondetailsdialog-331x188.png)

1. Click **Add Connectors**.


The **Connector Selection** dialog displays.

1. Click the **All Solutions** tab and select a connector to add.


![](/images/csdirector-cstruss/resources/images/ts-addconnectortoelevation-475x303.png)

1. Click **Add to Elevation**.


The connector is added to the layout.

You remain in Connector Selector mode until you press **Esc,** right-click, or Accept to exit.

You cannot specify a hanger at a mid-span bearing. Hangers may only be specified at the ends of a truss.

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) **Note:** Hangers display in 3D hanger on the layout. Generic 3D hangers display on layout if there is not a supporting .stl file.

![](/images/csdirector-cstruss/transparent.gif)Example

![](/images/csdirector-cstruss/resources/images/ts-3dhangers-hangers.jpg) ![](/images/csdirector-cstruss/resources/images/ts-3dgeneric-hanger-closeup-384x317.png)

**Related Topics**