# Mirror Objects

**Purpose**

Layouts are often mirrored so that the layout correctly reflects the way the house is oriented on the lot. One example is a lot that requires the garage on the left hand side while another lot with the same plan (layout) requires the garage to be on the right. Multi-family projects may also use mirroring. Many of these projects have the same units repeated throughout the building. A mirror command gives the ability to create one unit and then mirror it.

**Prerequisites**

An existing layout with objects to mirror

**Steps**

1. Select an object to mirror. To select multiple objects, use Ctrl+Shift and drag to select the objects.
2. From the **General** menu, select **Mirror Selected**, click ![](/images/csdirector-cstruss/resources/images/mirror-button.png), or right-click to select.


![](/images/csdirector-cstruss/resources/images/mirror-menu-118x301.png)

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png)**Note**: **Mirror All** works the same as **Mirror Selected** except that all objects in the layout are selected.

The following prompt is displayed:

![](/images/csdirector-cstruss/resources/images/mirror-caption-bar.png)

1. Create a reference line by selecting a wall edge, truss edge, work line, or plane edge; or use one of the reference line commands.


The reference line displays as a dashed green line. The **Enter Offset Distance** dialog also displays,  ![](/images/csdirector-cstruss/resources/images/enter-offset-distance-dialog-203x105.png)

1. Enter the desired offset amount and click **OK**. Leaving the distance as zero is also acceptable.


The reference line displays at a location based on the offset distance entered. The **Mirror** window displays.  ![](/images/csdirector-cstruss/resources/images/mirror-and-copy-dialog-227x140.png)

1. Make sure the **Mirror** option is selected and click **OK**.


The objects selected in step 1 are displayed mirrored about the reference line. The original objects and the reference line are no longer displayed. The layout is displayed as 'best fit' in the model space. This means that the new extents are based on the mirrored layout and the original layout does not impact the viewing area. If you select **Cancel**, the command is exited but the objects remain selected.The reference line is no longer displayed.

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png)**Notes**

- The Mirror Selected menu item and toolbar button are only available if an object is selected. If nothing is selected on the layout they are disabled and are grayed out.
- All of the selected text and labels are also mirrored when using this command.
- All of the trusses on the mirrored layout retain the same label as the original (non-mirrored) layout.
- Selected objects may be on different layers as long as they are visible to be selected. When they are mirrored they remain on the layers they were on originally.
- Mirror Selected and Rotate Selected are also located on the right-click menu when an object is selected.


![](/images/csdirector-cstruss/transparent.gif)Example

![](/images/csdirector-cstruss/resources/images/original-layout-512x573.png)

![](/images/csdirector-cstruss/resources/images/mirrored-layout-469x515.png)

**Related Topics**

[Copy and Mirror Selected Objects](/csdirector-cstruss/help-center/layout-view/copy-and-mirror-selected-objects)