# Modify Cap on Piggyback Truss

**Purpose**

Easily change the

cap size on a piggyback truss in Layout

**Prerequisites**

An existing piggyback truss in Layout

**Steps**

1. Select and delete the existing piggyback cap.


![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) Note that the base truss will still have a flat top on it at this point.

1. From **Truss Operations** menu, select **Piggyback**.


The **Piggyback Dialog** displays.

![](/images/csdirector-cstruss/resources/images/ts-piggybackdialog-232x307.png)

1. From the **How defined** dropdown list, select **Height of Base Above BC**.
2. Enter Dimension information.
3. Complete any other desired settings and click **OK**.


The new cap is created. The base truss will also have a new flat top height and length, based on information entered.

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) **Note:** Piggyback cap trusses with butt cuts at heels have an additional dimension indicating the true cap span; this provides clearer dimensions for fabrication.

![](/images/csdirector-cstruss/resources/images/ts-actual-overallspan.png)

**Related Topics**

[Create Piggyback Truss](/csdirector-cstruss/help-center/design-view/piggyback)

[Piggyback settings](/csdirector-cstruss/help-center/truss-studio-online-help/env-data-settings/piggyback-settings)

[Create Load Profile](/csdirector-cstruss/help-center/design-view/create-load-profile)