# Edit Stack List & Release Groups in Layout

**Purpose**

Use the Stack List to arrange trusses in a specific order for delivery purposes. Release Groups may be used by component manufacturers to divide layouts into smaller sections for manufacturing, delivering, and invoicing. For example, on a house with both floor and roof trusses, the floor trusses must be built and delivered earlier than the roof trusses.

Release Groups are saved to Director. You can edit the Stack List and Release Groups in both Director and Truss Studio; however, it is easier to view the truss stack order in Layout.

**Steps**

1. From the **Output** menu in Layout view, select **Stack List** or click ![](/images/csdirector-cstruss/resources/images/ts-stacklisticon.png).


The **Stack List** dialog displays.

![](/images/csdirector-cstruss/resources/images/ts-stacklisteditdialog.png)

Totals display at the bottom of the window; when you click **Display Subtotals**, subtotals for Stacked and Unstacked trusses display.

![](/images/csdirector-cstruss/resources/images/ts-stacklistsubtotals.png)

1. On the **Stack List** tab, you can also do the following:


- Split a stack (![](/images/csdirector-cstruss/resources/images/split-icon-26x25-28x28.png) ).
- Move **Unstacked Trusses** to the **Stacked Trusses** list using the arrow keys ![](/images/csdirector-cstruss/resources/images/ts-stacklistarrows-47x20.png) or drag and drop.
- Move **Stacked Trusses** to the **Unstacked Trusses** list using the arrow keys ![](/images/csdirector-cstruss/resources/images/ts-stacklistarrows-47x20.png) or drag and drop.
- Change the order of trusses in the Stacked Trusses list by dragging and dropping to the desired location in the list.
- Band selected trusses together. Select the truss and click ![](/images/csdirector-cstruss/resources/images/ts-stacklistbandingicon.png). A banding line displays under the name.
- Add/edit a banding note. The note displays beneath the banded item.
- Use the right-click menu to access other options:
  - Split Stack Item
  - Reverse Stacking List
  - Toggle Banding
  - Edit Banding Note
  - Move to Stack
  - Move to Unstack
  - New Set
  - Edit Set Quantity
  - Rename Set
  - Delete Set


![](/images/csdirector-cstruss/resources/images/ts-bandedtrussesstacklist-716x699.png)

An easy way to stack trusses in a specific order is to select them on the layout by dragging a line across the trusses to stack. The trusses appear on the Stacked Trusses list and are split up. For example, in the layout below, there is an A7 truss on the left side of the layout and an A7 truss on the right. They are split up as two separate items on the list.

![](/images/csdirector-cstruss/resources/images/ts-stackedtrussdragtoselect.png)

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) **Notes:**

- When the setting EnvData > LayoutSettings > Labels > Use the set name as the prefix for truss labels in a set is True, trusses moved into a set on the Stack List receive the set name as the prefix for the truss label.
- When the Stack List / Release Groups dialog is open and trusses are selected, pressing Esc clears all selections. If no trusses are selected, pressing Esc closes the dialog. If you have unsaved items in the list, a confirmation prompt displays first.


#### Drawing a box around selected trusses

Draw a box around select trusses when using Stack List command. This feature allows you to quickly move a group of trusses between the stacked and unstacked trusses lists. This feature is beneficial when adding shear panels or blocks to the Stack List.

- Use Shift-drag to draw a box around the trusses to move.
- All trusses that are included in the box are selected and move between the stacked and unstacked trusses list, depending on which list they were in prior to being group selected.


![](/images/csdirector-cstruss/resources/images/ts-boxtrussstacklist.png)

![](/images/csdirector-cstruss/transparent.gif)Use Split trusses to break up the total quantity of a truss design into multiple entries in the stack list.

In the example below, EJ4 (8) was split into three separate line items EJ4 (3), EJ4 (3) and EJ4 (2) <3+3+2=8>. Select the banded trusses to split and click ![](/images/csdirector-cstruss/resources/images/ts-stacklistsplitbutton.png). The **Quantity Input Dialog** displays. Specify the quantity for the new stack item and click **OK**.

![](/images/csdirector-cstruss/resources/images/ts-splitquantityinputdialot-331x122.png) ![](/images/csdirector-cstruss/resources/images/ts-splittrussexample.png)

#### Stack List and Layers Management

- When the Stack List dialog is open, Layers Management is enabled.
- When the Stack List dialog is dismissed, visibility settings are restored and any changes to visibility are not saved.


![](/images/csdirector-cstruss/resources/images/ts-stacklistlayersmgmtdropdown-858x524.png)

**Related Topics**

[Create Stacking List in Layout](/csdirector-cstruss/help-center/layout-view/stacking-list/create-stacking-list-from-layout)

[Banding Labels in Layout](/csdirector-cstruss/help-center/layout-view/banding-labels-on-layout)