# Rotate Objects

**Purpose**

Use this function to rotate an entire layout or just a portion. This function can be used for lot orientation or just changing the orientation of part of the structure. You can also use this function to rotate imported objects.

**Prerequisites**

An existing layout with objects to rotate

**Steps**

1. Select an object to rotate. To select multiple objects, use **Ctrl+Shift** and drag to select the objects.
2. From the **General** menu, select **Rotate Selected**, click ![](/images/csdirector-cstruss/resources/images/rotate-selected-button.png), or right-click to select.


![](/images/csdirector-cstruss/resources/images/ts-generalmenu.png)

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) **Note**: **Rotate All** works the same as **Rotate Selected** except that all objects in the layout are selected.

The following prompt displays:

![](/images/csdirector-cstruss/resources/images/rotate-prompt-666x18.png)

1. Select a point (snap points are active for this command), or selects two lines that intersect at a point.


A red square indicates the selected point.

If you select the space bar before selecting a point, the **Offset Point** window displays after you select the point.    If you click **Cancel**, the window closes and the point remains at the location you selected.    ![](/images/csdirector-cstruss/resources/images/rotate-offset-point-dialog-236x195.png) ![](/images/csdirector-cstruss/resources/images/offset-point-dialog-a-237x195.png)

1. Input the desired offset dimensions to move the point and click OK.


The **Set Rotation Angle** window displays.

![](/images/csdirector-cstruss/resources/images/set-rotation-angle-242x200.png)

1. Enter the rotation angle in degrees and click **OK**.


Angle may be input from 0 - 360 degrees and the decimal value can go to the hundredths place. The default value when the window is initially displayed is 0. The window displays the last value input each time it is invoked after it is initially displayed in that session.

The objects are rotated by the angle specified.  If you select **Cancel**, the command is exited but the objects remain selected.

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png)**Notes**

- The **Rotate** menu item and toolbar button are only available if an object is selected. If nothing is selected on the layout they are disabled and grayed out.
- All of the selected text and labels rotate when using this command.
- The selected objects can be on different layers as long as they are visible to be selected. When rotated, they remain on the layers they were on originally.
- Some imported PDF files are scanned and do not have snap points. In this case, select in the model space; the selection point will be used as the rotation point.


Example

![](/images/csdirector-cstruss/resources/images/layout-before-rotate-546x387.png)

![](/images/csdirector-cstruss/resources/images/rotated-layout-524x539.png)

**Related Topics**

[Copy and Mirror Selected Objects](/csdirector-cstruss/help-center/layout-view/copy-and-mirror-selected-objects)