# Split & Key Trusses

**Purpose**

Provides an easier method to

split floor trusses and specify a

keyed end description where the trusses are split

**Prerequisites**

An existing layout with trusses

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon-44x45.png) Watch Video - Split Truss Gap

1. Select a floor truss (3x2, 4x2 or 6x2) or group of floor trusses.


The selected trusses are highlighted.

1. From the **Truss Operations - Layout** menu, select **Split Truss** or click ![](/images/csdirector-cstruss/resources/images/ts-splittrussicon.png).


The prompt displays: ![](/images/csdirector-cstruss/resources/images/ts-splittrussprompt1.png)

1. Select a point or two lines that intersect at a point. To offset the point, press the space bar before selecting a point.


The truss is split at the location selected (The exact split location is at the location where an imaginary line crossing through the snap point and is perpendicular to the truss).

The **Split Truss - End Descriptions** dialog displays. The settings shown the first time the dialog displays are defined in Env Data > Layout Settings > [Split Truss > End Condition](/csdirector-cstruss/help-center/truss-studio-online-help/env-data-settings/split-truss-settings).

![](/images/csdirector-cstruss/resources/images/ts-splittrussdialog.png)

1. Select **Key** and define the desired end conditions. Click **OK**.


![](/images/csdirector-cstruss/transparent.gif)See examples of keyed end conditions

**Full Span**

![](/images/csdirector-cstruss/resources/images/ts-splittruss-fullspan-631x142.png)

Split Truss - Non-Standard

![](/images/csdirector-cstruss/resources/images/ts-splittruss-non-std-622x437.png)

**Close-up Key**

![](/images/csdirector-cstruss/resources/images/ts-splittruss-zoomedinkey-674x424.png)

Before splitting a varying depth floor truss, ensure the shallow portion of the truss is on the left. Then, use **Split Truss** or click ![](/images/csdirector-cstruss/resources/images/ts-splittrussicon.png).

![](/images/csdirector-cstruss/resources/images/ts-splittrussobstructionprofile.png)

![](/images/csdirector-cstruss/resources/images/ts-splittrussobstructionprofile2-925x405.png)

Split Floor Trusses Over Wall

You also have the ability to specify a gap between two pieces when splitting floor trusses over a wall. This option may be useful in a center hallway where the floor does not continue through; you may want to design the truss from outer wall to outer wall, then split the trusses on the left hallway wall, specifying the width of the hallway to trim back the right half.

![](/images/csdirector-cstruss/resources/images/ts-gapsplitfloortruss-1032x623.png)

#### Ability to specify a gap between floor truss ends when splitting floor trusses over a wall (coming in 2024.7)

The **From End** option applies the gap at the end of selected trusses) The **Center** option centers the gap on the selected location, instead of the edge of the gap. These two options are unavailable if **Key** is selected at the top of the dialog.

![](/images/csdirector-cstruss/resources/images/ts-splittruss-endgap-fromend-center.png)

**Related Topics**

[Split Truss Settings](/csdirector-cstruss/help-center/truss-studio-online-help/env-data-settings/split-truss-settings)