# Trim/Bevel Overhangs on Corner Girders

**Purpose**

In some regions, corner girder overhangs extend to the outside edge to support the (sub)fascia. Use this feature to extend the overhang to the long point and either cut it in the field or apply the bevel cut in the shop.

**Prerequisites**

An existing layout with overhangs on corner girders

**Steps**

1. Open the layout.
2. On the **Hip Set** or **Corner Set** dialog, choose the appropriate option, depending on whether you want to square cut or bevel the overhang. Also specify whether or not to extend the corner girder overhang to the long point, requiring field-modification.


![](/images/csdirector-cstruss/resources/images/ts-hipsetdialogbothoptions.png)

![](/images/csdirector-cstruss/resources/images/ts-cornergirderoh-example.png)

| **Description** | **Corner Girder OH Setting** | **Extend Corner Girder OH** | **Example** |
|  --- | --- | --- | --- |
| Double end & Extend | Double | Checked | ![](/images/csdirector-cstruss/resources/images/ts-doubleandextend-474x297.png) |
| None & Extend | None | Checked | ![](/images/csdirector-cstruss/resources/images/ts-noneandextend-469x305.png) |
| Double & Extend with Fascia | Double | Checked | ![](/images/csdirector-cstruss/resources/images/ts-doubleandextendwithfascia-506x426.png) |
| Dual Pitch Hip | None | Checked | ![](/images/csdirector-cstruss/resources/images/ts-dualpitchhip-493x422.png) |


**Related Topics**