# Use Reference Lines to Adjust Lay-in Gables

**Purpose**

Simplify the creation of polygon areas by using reference lines for lay-in gables. This is useful in cases where you want to easily adjust the side of the gable to have a greater fit tolerance.

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon-43x44.png) Watch video

1. Adjust the layin gable fit tolerance at **EnvData > Layout Controls > Mfg Controls > Lay-in gable fit tolerance**. This setting allows you to add a gap around layin gables to prevent interference with other trusses.


The truss below was created with a 1/4" tolerance but the layin gable is hitting the valley line. You can use a reference line to create a gap greater than a 1/4".

![](/images/csdirector-cstruss/resources/images/ts-layingableinterference-849x513.jpg)

1. Select **Lay-in Gable** from the **Truss Placement** menu or click the **Lay-in Gable** icon on the toolbar.
2. Select the lines to create the Lay-in gable polygon area.


![](/images/csdirector-cstruss/resources/images/ts-layingableselectridgelines-868x704.jpg)

For this example, the tolerance fit will be increased to 1/2" using reference lines. You can use any reference line command to do this. This example uses a Parallel reference line.

1. Select **Parallel** from the **Reference Lines** menu or click the Parallel reference line icon ![](/images/csdirector-cstruss/resources/images/parallel-line-button-33x32.png) on the toolbar.
2. Draw a parallel reference line, as shown below (reference line is green, boundary lines are red).


The **Enter Offset Distance** dialog displays.

![](/images/csdirector-cstruss/resources/images/ts-layinpolyexample-refline-864x698.jpg)

1. Enter an offset distance for the line and click **OK**.


For this example, 600 (6") was entered as the offset distance.

![](/images/csdirector-cstruss/resources/images/ts-layinpolyexample-6inchoffset-840x691.jpg)

1. Right-click to accept and complete the polygon.


The gable is placed, as shown below, with 6 1/4" gap. See the video link above for additional examples.

![](/images/csdirector-cstruss/resources/images/ts-layinpolyexample-gableplacement.jpg)

**Related Topics**