# View Layout in Perspective Mode

**Purpose**

Perspective mode allows you to set a point on the layout and rotate the 3D model around that point. This allows for better viewing and easier selection of objects in the layout.

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon.png) Watch video

1. On a layout, press and hold Alt-left-click while dragging the cursor. You can also use the center mouse button.


The model rotates as you drag the cursor, allowing you to view the model from different perspectives.

The perspective point is marked with the![](/images/csdirector-cstruss/resources/images/ts-perspectiveview-symbol-34x34.png) symbol.

![](/images/csdirector-cstruss/resources/images/ts-perspective-view.png)

1. You can also use this view to do the following:


- Zoom into walls and easily view hangers


![](/images/csdirector-cstruss/resources/images/ts-detailedconnector-621x399.png)

- Save a current view to a view port and display on Director reports:
- Click Save to Layout Report ![](/images/csdirector-cstruss/resources/images/ts-savecurrentviewtodir.png)
- Select a view port option to save the view


![](/images/csdirector-cstruss/resources/images/ts-savetoviewport.png)

**Note:** If you zoom out and lose your focus, click **Zoom All** ![](/images/csdirector-cstruss/resources/images/ts-zoomallbutton.png) to bring the layout back into focus on the workspace.