# Working With Green Lumber

**Purpose**

When working with green lumber Green lumber is unseasoned wood with a moisture content above 19%., you must define the EnvData setting for green lumber, create a material catalog, and create/select the appropriate template.

**Steps**

1. In CS Director, create a material catalog.


- Under **Material Catalog Setup**, make a copy of the existing material catalog.  ![](/images/csdirector-cstruss/resources/images/ts-greenlumber-catalog-763x363.png)
- Use that copy to define lumber pricing for Green and Dry Lumber templates.


![](/images/csdirector-cstruss/resources/images/ts-greenlumberpricing-1133x427.png)

1. Select the preferred template when creating a new project.


![](/images/csdirector-cstruss/resources/images/ts-selectnewprojtemplate.png)

For an existing project, change the template using Project Info tab > General > Settings.

![](/images/csdirector-cstruss/resources/images/ts-templatechangeexisting-proj-952x300.png)

1. In Truss Studio, under **EnvData >OneTrussControls > Green Lumber used**, set the value to **False** for dry lumber or **True** for green (wet) lumber.


![](/images/csdirector-cstruss/resources/images/ts-greenlumbersetting.png)

1. To change an existing layout, select the entire layout by pressing Shift-click-drag.
2. Click **Apply Env Data** ![](/images/csdirector-cstruss/resources/images/ts-applyenvdata-icon.png) on the toolbar.
3. Click **Analyze All** ![](/images/csdirector-cstruss/resources/images/ts-analyzeall.png) on the toolbar.


A warning displays.

![](/images/csdirector-cstruss/resources/images/ts-reanalyzeall-message.jpg)

1. Click **Yes** to continue.


The setting you selected in Env Data is applied to the selected layout.

Green lumber (Yes or No) is indicated on the TDD.

![](/images/csdirector-cstruss/resources/images/ts-greenlumber-tdd.png)

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png) **Note:** Plates used with wet lumber are typically larger because plates are analyzed at 80% of the plate value. With dry lumber, plate size will usually decrease because plates are analyzed at 100% of the plate value.

**Related Topics**