# Re-profile Top or Bottom Chords

**Purpose**

To edit top or bottom chords together or independent of each other

**Prerequisites**

An existing truss

**Steps**

![](/images/csdirector-cstruss/resources/images/video-icon-43x44-33x33.png) Watch video

To re-profile a top or bottom chord:

1. Select a truss or group of trusses.
2. From the Truss Operations menu select Re-profile, click ![](/images/csdirector-cstruss/resources/images/reprofile-button.png), or right-click to select.


The **Profile Selected Trusses** window displays.

![](/images/csdirector-cstruss/resources/images/reprofile-dialog-364x200.png)

1. Select **Do Not Change** under Top Chord and click OK.
2. Select **Specified Planes in order L-R** under Bottom Chord.


The following prompt displays in the caption bar:

![](/images/csdirector-cstruss/resources/images/reprofile-command.png)

1. Select the planes in order, from the left heel.


The selected planes are highlighted in magenta

1. Right mouse click to accept the changes.


The truss is re-profiled based on the planes, and the selected planes are deselected (they are displayed with standard color) on the layout.

![](/images/csdirector-cstruss/resources/images/note-onlinehelp.png)Notes:

1. The bottom chord profile starts at the left heel with a 0/12 pitch at the height of the wall, unless you manually select a pitched plane or a 0/12 plane at a different height.
2. Rules to force the vertical bottom chord:


• A wall edge or work line without a plane attached may be selected to force the bottom chord vertical. • With the Attached Plane button deselected (turned off), a vertical bottom chord will be forced with the selection of a wall edge or work line that has a plane attached. • Selecting the opposite side of the work line than the plane tag is displayed on will force the bottom chord vertical; this happens even if the Attached Plane button is selected (turned on). Selecting the plane side of the work line will select the attached plane and not force a vertical bottom chord.

1. The last plane selected before the right mouse select does not have to be at the wall line. If you select a plane inside the truss and then accept, the bottom chord will continue with a 0/12 plane at the top of wall height at the right heel.
2. The truss end of the truss (left or right heel) does not need to be the same height as the top of the wall at that location. For example, the top of the wall might be at 8-0-0 but if you select a work plane that was a 0/12 plane at 10-0-0, the truss height at the end of the truss would be 10-0-0, which is not the same height as the wall at that location.


![](/images/csdirector-cstruss/transparent.gif)

Click here to see examples of this command.

![](/images/csdirector-cstruss/resources/images/layouta-771x920.png)

![](/images/csdirector-cstruss/resources/images/layouta1-801x839.png)

![](/images/csdirector-cstruss/resources/images/layouta2-790x994.png)

![](/images/csdirector-cstruss/resources/images/layouta3-916x951.png)

**Related Topics**

[Re-profile Chords Globally](/csdirector-cstruss/help-center/truss-studio-online-help/edit-joints/re-profile-chords-globally)